Export limit exceeded: 428751 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (112261 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error] | ||||
| CVE-2023-54300 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should validate pkt_len before accessing the SKB. For example, the obtained SKB may have been badly constructed with pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr but after being processed in ath9k_htc_rx_msg() and passed to ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI command header which should be located inside its data payload. Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit memory can be referenced. Tested on Qualcomm Atheros Communications AR9271 802.11n . Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-54302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP completion stats CQP completion statistics is read lockesly in irdma_wait_event and irdma_check_cqp_progress while it can be updated in the completion thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports. Make completion statistics an atomic variable to reflect coherent updates to it. This will also avoid load/store tearing logic bug potentially possible by compiler optimizations. [77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma] [77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4: [77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma] [77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma] [77346.171835] cqp_compl_worker+0x1b/0x20 [irdma] [77346.172009] process_one_work+0x4d1/0xa40 [77346.172024] worker_thread+0x319/0x700 [77346.172037] kthread+0x180/0x1b0 [77346.172054] ret_from_fork+0x22/0x30 [77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2: [77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma] [77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma] [77346.172592] irdma_create_aeq+0x390/0x45a [irdma] [77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma] [77346.172944] irdma_probe+0x54f/0x620 [irdma] [77346.173122] auxiliary_bus_probe+0x66/0xa0 [77346.173137] really_probe+0x140/0x540 [77346.173154] __driver_probe_device+0xc7/0x220 [77346.173173] driver_probe_device+0x5f/0x140 [77346.173190] __driver_attach+0xf0/0x2c0 [77346.173208] bus_for_each_dev+0xa8/0xf0 [77346.173225] driver_attach+0x29/0x30 [77346.173240] bus_add_driver+0x29c/0x2f0 [77346.173255] driver_register+0x10f/0x1a0 [77346.173272] __auxiliary_driver_register+0xbc/0x140 [77346.173287] irdma_init_module+0x55/0x1000 [irdma] [77346.173460] do_one_initcall+0x7d/0x410 [77346.173475] do_init_module+0x81/0x2c0 [77346.173491] load_module+0x1232/0x12c0 [77346.173506] __do_sys_finit_module+0x101/0x180 [77346.173522] __x64_sys_finit_module+0x3c/0x50 [77346.173538] do_syscall_64+0x39/0x90 [77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd [77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 | ||||
| CVE-2023-50053 | 1 Foundation Platform | 1 Foundation App | 2026-04-15 | 7.6 High |
| An issue in Foundation.app Foundation platform 1.0 allows a remote attacker to obtain sensitive information via the Web3 authentication process of Foundation, the signed message lacks a nonce (random number) | ||||
| CVE-2023-53820 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: loop: loop_set_status_from_info() check before assignment In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos | ||||
| CVE-2023-50015 | 2026-04-15 | 8.8 High | ||
| An issue was discovered in Grandstream GXP14XX 1.0.8.9 and GXP16XX 1.0.7.13, allows remote attackers to escalate privileges via incorrect access control using an end-user session-identity token. | ||||
| CVE-2023-38290 | 2 Bluview, Sharp | 2 Bluview, Rouvo V | 2026-04-15 | 7.8 High |
| Certain software builds for the BLU View 2 and Sharp Rouvo V Android devices contain a vulnerable pre-installed app with a package name of com.evenwell.fqc (versionCode='9020801', versionName='9.0208.01' ; versionCode='9020913', versionName='9.0209.13' ; versionCode='9021203', versionName='9.0212.03') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.evenwell.fqc app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user's apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1663816427:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1656476696:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1647856638:user/release-keys) and Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_460:user/release-keys and SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys). This malicious app starts an exported activity named com.evenwell.fqc/.activity.ClickTest, crashes the com.evenwell.fqc app by sending an empty Intent (i.e., having not extras) to the com.evenwell.fqc/.FQCBroadcastReceiver receiver component, and then it sends command arbitrary shell commands to the com.evenwell.fqc/.FQCService service component which executes them with "system" privileges. | ||||
| CVE-2023-38291 | 2026-04-15 | 7.1 High | ||
| An issue was discovered in a third-party component related to ro.boot.wifimacaddr, shipped on devices from multiple device manufacturers. Various software builds for the following TCL devices (30Z and 10L) and Motorola devices (Moto G Pure and Moto G Power) leak the Wi-Fi MAC address to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); and Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys). This malicious app reads from the "ro.boot.wifimacaddr" system property to indirectly obtain the Wi-Fi MAC address. | ||||
| CVE-2023-38292 | 1 Tcl | 1 20xe | 2026-04-15 | 8.7 High |
| Certain software builds for the TCL 20XE Android device contain a vulnerable, pre-installed app with a package name of com.tct.gcs.hiddenmenuproxy (versionCode='2', versionName='v11.0.1.0.0201.0') that allows local third-party apps to programmatically perform a factory reset due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.tct.gcs.hiddenmenuproxy app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable build are as follows: TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys. This malicious app sends a broadcast intent to the exported com.tct.gcs.hiddenmenuproxy/.rtn.FactoryResetReceiver receiver component, which initiates a programmatic factory reset. | ||||
| CVE-2023-38293 | 2026-04-15 | 7.3 High | ||
| Certain software builds for the Nokia C200 and Nokia C100 Android devices contain a vulnerable, pre-installed app with a package name of com.tracfone.tfstatus (versionCode='31', versionName='12') that allows local third-party apps to execute arbitrary AT commands in its context (radio user) via AT command injection due to inadequate access control and inadequate input filtering. No permissions or special privileges are necessary to exploit the vulnerability in the com.tracfone.tfstatus app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys and Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_040:user/release-keys) and Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_130:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_110:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_080:user/release-keys, and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_050:user/release-keys). This malicious app sends a broadcast Intent to the receiver component named com.tracfone.tfstatus/.TFStatus. This broadcast receiver extracts a string from the Intent and uses it as an extra when it starts the com.tracfone.tfstatus/.TFStatusActivity activity component which uses the externally controlled string as an input to execute an AT command. There are two different injection techniques to successfully inject arbitrary AT commands to execute. | ||||
| CVE-2023-38295 | 2026-04-15 | 7.8 High | ||
| Certain software builds for the TCL 30Z and TCL 10 Android devices contain a vulnerable, pre-installed app that relies on a missing permission that provides no protection at runtime. The missing permission is required as an access permission by components in various pre-installed apps. On the TCL 30Z device, the vulnerable app has a package name of com.tcl.screenrecorder (versionCode='1221092802', versionName='v5.2120.02.12008.1.T' ; versionCode='1221092805', versionName='v5.2120.02.12008.2.T'). On the TCL 10L device, the vulnerable app has a package name of com.tcl.sos (versionCode='2020102827', versionName='v3.2014.12.1012.B'). When a third-party app declares and requests the missing permission, it can interact with certain service components in the aforementioned apps (that execute with "system" privileges) to perform arbitrary files reads/writes in its context. An app exploiting this vulnerability only needs to declare and request the single missing permission and no user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 10L (TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys) and TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys). This malicious app declares the missing permission named com.tct.smart.switchphone.permission.SWITCH_DATA as a normal permission, requests the missing permission, and uses it to interact with the com.tct.smart.switchdata.DataService service component that is declared in vulnerable apps that execute with "system" privileges to perform arbitrary file reads/writes. | ||||
| CVE-2023-38296 | 1 Tcl | 1 30z Firmware | 2026-04-15 | 8 High |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. | ||||
| CVE-2023-38297 | 2026-04-15 | 8.4 High | ||
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. | ||||
| CVE-2023-38298 | 2026-04-15 | 8.8 High | ||
| Various software builds for the following TCL devices (30Z, A3X, 20XE, 10L) leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys); TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 20XE (TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys); and TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys). This malicious app reads from the "gsm.device.imei0" system property to indirectly obtain the device IMEI. | ||||
| CVE-2023-5000 | 1 Gopiplus | 1 Horizontal Scrolling Announcement | 2026-04-15 | 8.8 High |
| The Horizontal scrolling announcements plugin for WordPress is vulnerable to SQL Injection via the plugin's 'hsas-shortcode' shortcode in versions up to, and including, 2.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers with contributor-level and above permissions to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | ||||
| CVE-2024-13232 | 2026-04-15 | 8.8 High | ||
| The WordPress Awesome Import & Export Plugin - Import & Export WordPress Data plugin for WordPress is vulnerable arbitrary SQL Execution and privilege escalation due to a missing capability check on the renderImport() function in all versions up to, and including, 4.1.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to execute arbitrary SQL statements that can leveraged to create a new administrative user account. | ||||
| CVE-2023-53832 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") | ||||
| CVE-2023-38399 | 2026-04-15 | 8.6 High | ||
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Averta Phlox Portfolio allows PHP Local File Inclusion.This issue affects Phlox Portfolio: from n/a through 2.3.1. | ||||
| CVE-2023-54333 | 2 Artlosk, Wordpress | 2 Social Share Buttons, Wordpress | 2026-04-15 | 8.2 High |
| Social-Share-Buttons 2.2.3 contains a critical SQL injection vulnerability in the project_id parameter that allows attackers to manipulate database queries. Attackers can exploit this vulnerability by sending crafted POST requests with malicious SQL payloads to retrieve and potentially steal entire database contents. | ||||
| CVE-2023-54336 | 1 Infonetsoftware | 1 Mediconta | 2026-04-15 | 8.4 High |
| Mediconta 3.7.27 contains an unquoted service path vulnerability in the servermedicontservice that allows local users to potentially execute code with elevated privileges. Attackers can exploit the unquoted path in C:\Program Files (x86)\medicont3\ to inject malicious code that would execute with LocalSystem permissions during service startup. | ||||