| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Part-DB 0.4 contains an authentication bypass vulnerability that allows unauthenticated attackers to login by injecting SQL syntax into authentication parameters. Attackers can submit a single quote followed by 'or' in the login form to bypass credential validation and gain unauthorized access to the application. |
| An improper access control vulnerability may allow privilege escalation.This issue affects:
* ELI 380 Resting Electrocardiograph:
Versions 2.6.0 and prior;
* ELI 280/BUR280/MLBUR 280 Resting Electrocardiograph:
Versions 2.3.1 and prior;
* ELI 250c/BUR 250c Resting Electrocardiograph: Versions 2.1.2 and prior;
* ELI 150c/BUR 150c/MLBUR 150c Resting Electrocardiograph:
Versions 2.2.0 and prior. |
| A vulnerability has been found in TOZED ZLT M30S and ZLT M30S PRO 1.47/3.09.06. Affected is an unknown function of the component Web Interface. Such manipulation leads to hard-coded credentials. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in vanquish Upload Files Anywhere wp-upload-files-anywhere allows Path Traversal.This issue affects Upload Files Anywhere: from n/a through <= 2.8. |
| delpino73 Blue-Smiley-Organizer 1.32 contains an SQL injection vulnerability in the datetime parameter that allows unauthenticated attackers to manipulate database queries. Attackers can inject SQL code through POST requests to extract sensitive data using boolean-based blind and time-based blind techniques, or write files to the server using INTO OUTFILE statements. |
| Hitachi Ops Center Common Services within Hitachi Ops Center Analyzer viewpoint OVF contains an authentication credentials leakage vulnerability.This issue affects Hitachi Ops Center Common Services: from 10.0.0-00 before 11.0.0-04; Hitachi Ops Center Analyzer viewpoint OVF: from 10.0.0-00 before 11.0.0-04. |
| An authentication bypass vulnerability could allow an attacker to access API functions without authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: Fix direction for 0-length ioctl control messages
The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:
------------[ cut here ]------------
usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd
WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41
RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000
RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001
RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528
R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100
FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline]
usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097
To fix this, we must override the direction in the bRequestType field
of the control request structure when the length is 0. |
| DupTerminator 1.4.5639.37199 contains a denial of service vulnerability that allows attackers to crash the application by inputting a long character string in the Excluded text box. Attackers can generate a payload of 8000 repeated characters to trigger the application to stop working on Windows 10. |
| : Modification of Assumed-Immutable Data (MAID) vulnerability in ABB ANC, ABB ANC-L, ABB ANC-mini.This issue affects ANC: through 1.1.4; ANC-L: through 1.1.4; ANC-mini: through 1.1.4. |
| The Archify application contains a local privilege escalation vulnerability due to insufficient client validation in its privileged helper tool, com.oct4pie.archifyhelper, which is exposed via XPC. Archify follows the "factored applications" model, delegating privileged operations—such as arbitrary file deletion and file permission changes—to this helper running as root. However, the helper does not verify the code signature, entitlements, or signing flags of the connecting client. Although macOS provides secure validation mechanisms like auditToken, these are not implemented. As a result, any local process can establish a connection to the helper and invoke privileged functionality, leading to unauthorized execution of actions with root-level privileges. |
| A vulnerability has been found in Mercury KM08-708H GiGA WiFi Wave2 1.1. Affected by this issue is the function sub_450B2C of the file /goform/mcr_setSysAdm. The manipulation of the argument ChgUserId leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: Fix memory leaks with RTL8723BU, RTL8192EU
The wifi + bluetooth combo chip RTL8723BU can leak memory (especially?)
when it's connected to a bluetooth audio device. The busy bluetooth
traffic generates lots of C2H (card to host) messages, which are not
freed correctly.
To fix this, move the dev_kfree_skb() call in rtl8xxxu_c2hcmd_callback()
inside the loop where skb_dequeue() is called.
The RTL8192EU leaks memory because the C2H messages are added to the
queue and left there forever. (This was fine in the past because it
probably wasn't sending any C2H messages until commit e542e66b7c2e
("wifi: rtl8xxxu: gen2: Turn on the rate control"). Since that commit
it sends a C2H message when the TX rate changes.)
To fix this, delete the check for rf_paths > 1 and the goto. Let the
function process the C2H messages from RTL8192EU like the ones from
the other chips.
Theoretically the RTL8188FU could also leak like RTL8723BU, but it
most likely doesn't send C2H messages frequently enough.
This change was tested with RTL8723BU by Erhard F. I tested it with
RTL8188FU and RTL8192EU. |
| ComfyUI-Impact-Pack is vulnerable to Path Traversal. The issue stems from missing validation of the `image.filename` field in a POST request sent to the `/upload/temp` endpoint added by the extension to the server. This results in writing arbitrary files to the file system which may, under some conditions, result in remote code execution (RCE). |
| Snyk has identified a remote code execution (RCE) vulnerability in all versions of Code Agent. The vulnerability enables an attacker to execute arbitrary code within the Code Agent container. Exploiting this vulnerability would require an attacker to have network access to the Code Agent within the deployment environment. External exploitation of this vulnerability is unlikely and depends on both misconfigurations of the cluster and/or chaining with another vulnerability. However, internal exploitation (with a cluster misconfiguration) could still be possible. |
| Versions of the package djoser before 2.3.0 are vulnerable to Authentication Bypass when the authenticate() function fails. This is because the system falls back to querying the database directly, granting access to users with valid credentials, and eventually bypassing custom authentication checks such as two-factor authentication, LDAP validations, or requirements from configured AUTHENTICATION_BACKENDS. |
| Versions of the package luigi before 3.6.0 are vulnerable to Arbitrary File Write via Archive Extraction (Zip Slip) due to improper destination file path validation in the _extract_packages_archive function. |
| All versions of the package ggit are vulnerable to Command Injection via the fetchTags(branch) API, which allows user input to specify the branch to be fetched and then concatenates this string along with a git command which is then passed to the unsafe exec() Node.js child process API. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Cap MSIX used to online CPUs + 1
The irdma driver can use a maximum number of msix vectors equal
to num_online_cpus() + 1 and the kernel warning stack below is shown
if that number is exceeded.
The kernel throws a warning as the driver tries to update the affinity
hint with a CPU mask greater than the max CPU IDs. Fix this by capping
the MSIX vectors to num_online_cpus() + 1.
WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
Call Trace:
irdma_rt_init_hw+0xa62/0x1290 [irdma]
? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma]
? __is_kernel_percpu_address+0x63/0x310
? rcu_read_lock_held_common+0xe/0xb0
? irdma_lan_unregister_qset+0x280/0x280 [irdma]
? irdma_request_reset+0x80/0x80 [irdma]
? ice_get_qos_params+0x84/0x390 [ice]
irdma_probe+0xa40/0xfc0 [irdma]
? rcu_read_lock_bh_held+0xd0/0xd0
? irdma_remove+0x140/0x140 [irdma]
? rcu_read_lock_sched_held+0x62/0xe0
? down_write+0x187/0x3d0
? auxiliary_match_id+0xf0/0x1a0
? irdma_remove+0x140/0x140 [irdma]
auxiliary_bus_probe+0xa6/0x100
__driver_probe_device+0x4a4/0xd50
? __device_attach_driver+0x2c0/0x2c0
driver_probe_device+0x4a/0x110
__driver_attach+0x1aa/0x350
bus_for_each_dev+0x11d/0x1b0
? subsys_dev_iter_init+0xe0/0xe0
bus_add_driver+0x3b1/0x610
driver_register+0x18e/0x410
? 0xffffffffc0b88000
irdma_init_module+0x50/0xaa [irdma]
do_one_initcall+0x103/0x5f0
? perf_trace_initcall_level+0x420/0x420
? do_init_module+0x4e/0x700
? __kasan_kmalloc+0x7d/0xa0
? kmem_cache_alloc_trace+0x188/0x2b0
? kasan_unpoison+0x21/0x50
do_init_module+0x1d1/0x700
load_module+0x3867/0x5260
? layout_and_allocate+0x3990/0x3990
? rcu_read_lock_held_common+0xe/0xb0
? rcu_read_lock_sched_held+0x62/0xe0
? rcu_read_lock_bh_held+0xd0/0xd0
? __vmalloc_node_range+0x46b/0x890
? lock_release+0x5c8/0xba0
? alloc_vm_area+0x120/0x120
? selinux_kernel_module_from_file+0x2a5/0x300
? __inode_security_revalidate+0xf0/0xf0
? __do_sys_init_module+0x1db/0x260
__do_sys_init_module+0x1db/0x260
? load_module+0x5260/0x5260
? do_syscall_64+0x22/0x450
do_syscall_64+0xa5/0x450
entry_SYSCALL_64_after_hwframe+0x66/0xdb |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Prevent RT livelock in itimer_delete()
itimer_delete() has a retry loop when the timer is concurrently expired. On
non-RT kernels this just spin-waits until the timer callback has completed,
except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK
enabled.
In that case and on RT kernels the existing task could live lock when
preempting the task which does the timer delivery.
Replace spin_unlock() with an invocation of timer_wait_running() to handle
it the same way as the other retry loops in the posix timer code. |