| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.spnego descriptions
cifs.spnego key descriptions contain authority-bearing fields such as
pid, uid, creduid, and upcall_target that cifs.upcall treats as
kernel-originating inputs. However, userspace can also create keys of
this type through request_key(2) or add_key(2), allowing those fields to
be supplied without CIFS origin.
Only accept cifs.spnego descriptions while CIFS is using its private
spnego_cred to request the key. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: fix buffer size clamping order
In vsock_update_buffer_size(), the buffer size was being clamped to the
maximum first, and then to the minimum. If a user sets a minimum buffer
size larger than the maximum, the minimum check overrides the maximum
check, inverting the constraint.
This breaks the intended socket memory boundaries by allowing the
vsk->buffer_size to grow beyond the configured vsk->buffer_max_size.
Fix this by checking the minimum first, and then the maximum. This
ensures the buffer size never exceeds the buffer_max_size. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix accept queue count leak on transport mismatch
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs()
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah: account for ESN high bits in async callbacks
AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.
With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:
ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36
Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.
Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Avoid OOB font access if console rotation fails
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in symlink_data()
Since smb2_check_message() returns success without length validation for
the symlink error response, in symlink_data() it is possible for
iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer
only contains the base SMB2 header (64 bytes), accessing
err->ErrorContextCount (at offset 66) or err->ByteCount later in
symlink_data() will cause an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix scheduling with atomic in timestamp sockopt
Using lock_sock_fast() (atomic context) around sock_set_timestamp()
and sock_set_timestamping() is unsafe, as both helpers can sleep.
Replace lock_sock_fast() with sleepable lock_sock()/release_sock()
to avoid scheduling while atomic panic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak
btrfs_ioctl_space_info() has a TOCTOU race between two passes over the
block group RAID type lists. The first pass counts entries to determine
the allocation size, then the second pass fills the buffer. The
groups_sem rwlock is released between passes, allowing concurrent block
group removal to reduce the entry count.
When the second pass fills fewer entries than the first pass counted,
copy_to_user() copies the full alloc_size bytes including trailing
uninitialized kmalloc bytes to userspace.
Fix by copying only total_spaces entries (the actually-filled count from
the second pass) instead of alloc_size bytes, and switch to kzalloc so
any future copy size mismatch cannot leak heap data. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device. |
