| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: treat empty auth.unix.gid replies as negative entries
When rpc.mountd cannot resolve a uid (getpwuid() or getgrouplist()
failure, e.g. while winbind or sssd is briefly unreachable), it
answers the auth.unix.gid upcall with zero groups. unix_gid_parse()
installs that as a valid positive entry, and svcauth_unix_set_client()
then replaces the credential's group list with the empty one on
every request, RPCSEC_GSS included via svcauth_gss_set_client().
One failed lookup strips that uid of all supplementary groups on
every export for up to mountd's configured TTL (30 minutes by
default), long after the NSS backend has recovered.
mountd cannot send an empty list for a successful lookup, since
getgrouplist(3) always includes at least the user's primary group,
so a zero-group reply can only mean the lookup failed. Record it as
a negative entry: unix_gid_find() then returns -ENOENT and
svcauth_unix_set_client() keeps the groups the RPC credential
already carries. This is the fallback that
commit 3fc605a2aa38 ("[PATCH] knfsd: allow the server to provide a
gid list when using AUTH_UNIX authentication") promised when no
answer is available, and the same state try_to_negate_entry()
already creates when no listener holds the channel open. |
| GPAC before 26.07.0 contains a type confusion vulnerability in xmt_parse_script_field() that allows attackers to trigger a heap out-of-bounds read via duplicate Script field names with conflicting types. Attackers can craft an XMT file that, when imported with MP4Box, causes gf_sg_vrml_mf_reset() to treat a single-value field as multi-value, crashing the application. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix VA/PA confusion in the coherent page fault path
vduse_domain_get_coherent_page() assumes that iotlb entries above
bounce_size were installed by vduse_domain_alloc_coherent(), so it
treats map->addr as a physical address. But vduse registers with
use_va = true, and when the device is bound to vhost_vdpa,
vhost_vdpa_va_map() stores a userspace virtual address in map->addr,
which vduse_domain_set_map() then copies into the same iotlb. A
process holding the domain file descriptor across a rebind can
therefore fault in an arbitrary physical page with read/write
access, ignoring the entry permissions.
Additionally, since the domain file mmap lacks VM_IO, the domain
file itself can be mapped and passed to vhost_vdpa_va_map(),
producing self-referential entries that bypass the coherent path
check.
To fix, only translate entries whose backing file is the domain
file itself in vduse_domain_get_coherent_page(), reject such
entries in vduse_domain_set_map() since only external mappings
should be imported, and set VM_IO on the domain file mmap so
vhost_vdpa_va_map() refuses to map it in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm87) Fix drvdata type confusion in vrm_show() and vrm_store()
When an LM87 or ADM1024 device is probed with VID support enabled, reading
from or writing to the vrm sysfs attribute triggers a driver data type
confusion in vrm_show() and vrm_store() in drivers/hwmon/lm87.c.
In lm87_probe(), the driver stores the struct lm87_data pointer on the I2C
client via i2c_set_clientdata() and passes the struct i2c_client pointer as
the drvdata argument to devm_hwmon_device_register_with_groups(), which
attaches the attribute groups to the registered hwmon device with client as
its driver_data. Unlike the other sysfs callbacks that retrieve client via
dev_get_drvdata() and then obtain data via i2c_get_clientdata(), vrm_show()
and vrm_store() assign dev_get_drvdata(dev) directly to struct lm87_data *.
Dereferencing data->vrm therefore accesses the struct i2c_client instance
at offsetof(struct lm87_data, vrm), causing vrm_show() to leak an unrelated
byte from struct i2c_client to userspace and vrm_store() to corrupt a byte
within struct i2c_client while failing to update the actual VRM value.
Fix the problem by assigning the return value from dev_get_drvdata(dev) to
struct i2c_client *client and using i2c_get_clientdata() to get the actual
client data. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004
cros_usbpd_notify_probe_acpi() takes the EC device pointer from
dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device.
That only holds when GOOG0003 is a child of GOOG0004. On older devices
without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are
siblings under the ACPI EC (PNP0C09):
PNP0C09:00 (acpi-ec)
|-- GOOG0003:00 (cros-usbpd-notify-acpi)
`-- GOOG0004:00 (cros_ec_lpcs)
Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform
one") the parent platform device had no driver data, so the driver
warned and continued without an EC pointer, as intended for these
devices. Since that commit the ACPI EC driver stores its struct acpi_ec
there, so the driver treats a struct acpi_ec as a struct cros_ec_device
and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging
or unplugging a charger then intermittently oopses, followed by soft
lockups and a hung system:
BUG: unable to handle page fault for address: ffffffff9cf03220
#PF: supervisor write access in kernel mode
Hardware name: Google Nami/Nami, BIOS 09/19/2019
Workqueue: kacpi_notify acpi_os_execute_deferred
RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330
Call Trace:
_raw_spin_lock_irqsave+0x59/0x80
__mutex_lock.constprop.0+0x129/0x930
cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto]
cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto]
cros_ec_cmd+0xb7/0x140 [cros_ec_proto]
cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify]
acpi_ev_notify_dispatch+0x4e/0x70
acpi_os_execute_deferred+0x1a/0x30
Only read the parent's driver data when the parent's ACPI node is
GOOG0004, and otherwise continue without an EC pointer. While at it,
drop the reference taken by fwnode_get_parent(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: split huge PUDs when adjusting VMA boundaries
PFN mappings such as VFIO PCI BAR mappings can use PUD leaves while
allowing VMA splits at page granularity. However, vma_adjust_trans_huge()
only handles PMDs.
After faulting a writable PUD-sized VFIO BAR mapping, changing its first
page to read-only with mprotect() makes the PMD walk treat the PUD leaf
as a PMD table. Applying MADV_DONTFORK to the first PMD-sized chunk leaves
the PUD spanning two VMAs: the PMD-aligned boundary skips splitting.
Walk the page tables once at each adjusted boundary and split a huge
PUD or PMD leaf as needed. Handle PUD leaves even when the boundary is
PMD-aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: call ->may_split() before a partial merge
A driver can use the ->may_split() hook to forbid a VMA boundary at
certain addresses.
A device-dax device is a character device that gives raw access to a
range of memory through mmap(). device-dax refuses any address that is not
a multiple of the device's alignment through vm_ops->may_split.
vma_merge_existing_range() can move boundaries, but does not call
vm_ops->may_split.
If a range at the edge of a VMA gets the attributes of the adjacent VMA,
the function moves only that range over to the neighbour: one VMA shrinks
and the other grows. This is a partial merge, and vma_modify() tries it
before any split.
Take a device-dax VMA that lies next to another VMA of the same file.
The user calls mprotect() on the one page of the first VMA that touches
the second VMA, and asks for the protection that the second VMA already
has. The result is a partial merge. It puts the boundary inside a 1 GiB
mapping, which is a single leaf entry at the PUD level.
As part of the merge, the kernel looks for a huge PMD to split at the
new boundary. That code does not expect a PUD leaf:
vma_merge_existing_range()
commit_merge()
vma_adjust_trans_huge()
split_huge_pmd_address()
mm_find_pmd()
treats the PUD leaf as a pointer to a PMD table,
so the "table" is the device memory that the leaf maps
__split_huge_pmd()
reads a PMD that the user wrote to the device memory
folio_put() on the folio that this PMD names
Bad. While the code must at some point be taught to split PUD entries as
well, the issue here is that we move VMA boundaries such that they are
incompatible with the driver.
Fix this by calling ->may_split() on the address that a partial merge
would move the boundary to, and by abandoning the merge if the driver
refuses. vma_modify() then tries the split, which fails with -EINVAL.
Factor out existing split handling into check_split() and reuse it.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: improve description; cleanup the code ] |
| Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response.
In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode.
A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM.
This issue affects gun: from 2.0.0-pre.1 before 2.4.0. |
| Access of resource using incompatible type ('type confusion') in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| Access of resource using incompatible type ('type confusion') in Windows Shell allows an authorized attacker to elevate privileges locally. |
| Wasmtime 47.0.0 before 48.0.8, 49.0.0 before 49.0.5, and 50.0.0 before 50.0.1 contains a cross-engine type confusion vulnerability because StructType::with_finality_and_supertype does not validate that the supplied supertype belongs to the same Engine. Embedders using multiple engines that create a GC struct type with another engine's supertype can trigger runtime panics or GC heap corruption, causing denial of service; guest WebAssembly cannot trigger it. |
| Improper enforcement of behavioral workflow in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to potentially launch a guest whose attestation report contains an ID key digest for an ID block that doesn't match the guest's measurement resulting in loss of integrity. |
| OpenMage magento-lts before 20.18.2 and 21.0.0-beta1 before 21.0.0-beta3 accepts the free (No Payment Information Required) payment method on orders with a non-zero total because the zero-total check runs only when payment data is imported. An API user with cart permissions can select free via cart_payment.method while the total is zero, raise it with cart_coupon.remove, and submit cart.order to place an unpaid full-price order. |
| littlefs through 2.11.3, when built with LFS_MIGRATE, contains a type confusion vulnerability in lfs_dir_traverse() that treats a stack lfs_diskoff struct as an lfs_attr array. Attackers can supply a crafted littlefs v1 image whose metadata is read as LFS_FROM_USERATTRS during migration, causing out-of-bounds stack reads and process crashes. |
| Access of resource using incompatible type ('type confusion') vulnerability in Samsung Open Source Starfish allows Input Data Manipulation. |
| Improper enforcement of behavioral workflow in Smart Switch prior to version 3.7.74.7 allows adjacent attackers to write arbitrary files with Smart Switch privilege. |
| @fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 7.4.0 through 10.1.8, when the plugin is registered with the attachFieldsToBody option, the saveRequestFiles helper treats any object in the parsed request body that carries truthy file and buffer properties as an uploaded file. An unauthenticated client can forge such an object through a plain JSON request or a JSON-typed multipart field, so attacker-chosen bytes are written to the temporary directory while upload hooks and the file count and size limits are skipped, and the saved entry keeps the attacker's filename verbatim instead of being reduced to its basename. Because that filename can contain parent directory segments, applications that use it as a write destination, as the project README example does, are exposed to an arbitrary relative-path file write from a single request. The issue is fixed in @fastify/multipart 10.1.9, and users should upgrade to 10.1.9 or later. As a workaround, call saveRequestFiles only after confirming the request is multipart, and reduce each returned filename to its basename or validate it against an allowlist before using it as a destination. |
| Type confusion in V8 in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Type confusion in V8 in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Access of resource using incompatible type ('type confusion') in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. |