| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthenticated client that can reach a MongoDB Connector for BI deployment configured with Kerberos authentication may cause mongosqld to terminate when a crafted authentication exchange encounters a specific GSSAPI error-handling condition. This can interrupt BI Connector availability until the process restarts. |
| Issue summary: QUIC server may double free QRX (QUIC record layer RX) object
when channel creation fails for initial packet.
Impact summary: Double free leads to heap corruption, which typically results in
termination of QUIC server process, leading to Denial of Service. There is so
far no evidence that this double free is exploitable for remote code execution,
thus it is considered highly improbable.
CWE: CWE-415: Double Free
Description: In order to validate initial packet, OpenSSL QUIC stack default
packet handler (port_default_packet_handler()) creates a so-called QRX object.
If the initial packet validates successfully with QRX object, the default packet
handler proceeds to channel (connection object) creation. The QRX object used
for packet validation is passed to port_bind_channel(), so it becomes part of
the newly created connection. If port_bind_channel() fails, then it also frees
the QRX object. Once port_bind_channel() returns, the port_default_packet_handler()
detects the failure and proceeds to the error branch, where the same QRX object is
freed for the second time.
The failure in port_bind_channel() function can be induced with a relatively
low effort by a malformed (non RFC 9000 compliant) INITIAL packet. If the packet
carries DCID (destination connection ID) which is shorter than 8 bytes, then
port_bind_channel() jumps to the error path after ossl_quic_lcidm_enrol_odcid()
detects that the DCID has invalid length.
FIPS impact: no
The FIPS module is not affected, as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| lwIP (Lightweight IP) has a double free vulnerability, which could crash the system, cause a DoS, memory corruption, or allow code execution on the victim system. |
| Double free in Windows Hello allows an authorized attacker to elevate privileges locally. |
| Double Free vulnerability in RTI Connext Professional (Core Libraries) allows File Manipulation. This issue affects Connext Professional: from 7.4.0 before 7.7.0.1, from 7.1.0 before 7.3.1.6. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0. |
| Double free in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally. |
| Double free in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally. |
| A double free in the OpenSSL-based TLS certificate revocation checking path of the MongoDB C Driver can be reached by a TLS endpoint that the client already trusts. During the handshake, specially formed certificate data can cause the same heap object to be released twice. An unauthenticated party acting as the trusted endpoint may cause the connecting client application to terminate unexpectedly. |
| A flaw was found in GIMP's PSP file format parser. A double-free condition occurs in the read_layer_block() function when processing a specially crafted PSP file. This could allow an attacker to cause memory corruption, potentially leading to denial of service or arbitrary code execution. |
| The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time.
The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes.
The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks.
Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound. |
| Double free in Windows Credential Guard allows an authorized attacker to elevate privileges locally. |
| An issue in kamailio v.6.1.1 and before allows a remote attacker to cause a denial of service via the ims_registrar_pcscf module, specifically the pcscf_save_pending/save_pending path and security-agreement parsing in sec_agree.c:parse_sec_agree() |
| A double free issue was addressed with improved memory management. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| A double free issue was addressed with improved memory management. This issue is fixed in macOS Golden Gate 27. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio_msi_cap_len() lazily allocates the per-device MSI permission table:
vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT);
if (!vdev->msi_perm)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
if (ret) {
kfree(vdev->msi_perm);
return ret; /* vdev->msi_perm left dangling */
}
When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the
error path frees vdev->msi_perm but leaves the freed pointer stored in
it. vdev->msi_perm is not re-zeroed later because struct
vfio_pci_core_device is per-device and persists across open/close cycles,
and the vfio_config_init() error path returns without calling
vfio_config_free(). So the dangling pointer outlives the failed open.
That leads to two use-after-frees on the same device:
1. Reuse. The next vfio_config_init() sees the stale pointer at
"if (vdev->msi_perm) return len;" and reuses the freed object. MSI
config accesses in vfio_pci_config_rw_single() then dereference and
call the freed perm->readfn / perm->writefn function pointers.
2. Double free. A later vfio_config_free() runs free_perm_bits() and
kfree() on the already-freed object.
Fix it by NULLing vdev->msi_perm after the kfree(), matching the
NULL-after-free discipline already used in free_perm_bits() and
vfio_config_free().
BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
Read of size 8 at addr ffff88800fcc88d0 by task exploit/143
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986)
vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599)
vfs_read (fs/read_write.c:572)
__x64_sys_pread64 (fs/read_write.c:764)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Followed on device close by a double free of the same object:
Oops: general protection fault, probably for non-canonical address
0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:kfree (mm/slub.c:6711)
Call Trace:
vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861)
vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685)
vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777)
vfio_df_close (drivers/vfio/vfio_main.c:602)
vfio_device_fops_release (drivers/vfio/vfio_main.c:648)
__fput (fs/file_table.c:512)
__x64_sys_close (fs/open.c:1496)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix a resource leak in copy_net_ns() error handling path
Currently, preinit_net() does two things:
(1) call ns_common_init() which might fail
(2) initialize resources which does not fail
However, preinit_net() is returning early when (1) fails, and copy_net_ns()
is jumping to the dec_ucounts: label. As a result, resources allocated by
net_alloc() are leaking. We need to call key_remove_domain() and
net_passive_dec() in order to release resources allocated by net_alloc().
We cannot simply jump to the put_userns: label when preinit_net() failed,
for (2) is not yet done. But we can reorder (1) and (2), for there is no
dependency between (1) and (2). Therefore, this patch decouples (1) from
preinit_net() and changes preinit_net() back to a void function, and calls
ns_common_init() after preinit_net() succeeded. Then, we can jump to
immediately after ns_common_free() of the put_userns: label. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ipu6: Do not free aux device pdata after init
ipu6_bus_initialize_device() stores the isys/psys pdata pointer in
struct ipu6_bus_device and initializes the auxiliary device. After that
point, error unwinding must drop the auxiliary device reference and let
ipu6_bus_release() free both the bus device and adev->pdata.
The isys and psys init paths already call put_device() when MMU
initialization fails, and ipu6_bus_add_device() calls
auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths
therefore run the bus release callback. The extra kfree(pdata) in the
callers can release the same object a second time.
Remove the manual pdata frees after the auxiliary device has been
initialized.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback
ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via
ath12k_peer_create(), which finishes by calling
ath12k_dp_link_peer_assign() to publish the dp_link_peer in the
dp_hw->dp_peers[peerid_index] RCU table, in the dp_peer's
link_peers[] array, and in the per-addr rhashtable.
If a step after ath12k_peer_create() fails the function jumps to
err_peer_del, which open-codes a WMI peer_delete and waits for the
unmap / delete_resp events. The wait_for_peer_delete_done() path
relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer
when the unmap arrives, but err_peer_del never calls
ath12k_dp_link_peer_unassign() first. The published references in
the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are
left pointing at the dp_link_peer that unmap_event then frees,
producing dangling pointers and use-after-free on subsequent
lookups.
Replace the open-coded sequence with a call to ath12k_peer_delete(),
which already does ath12k_dp_link_peer_unassign() before sending the
WMI command. This drops the published references before the
dp_link_peer is freed, in the same order as the normal teardown path
in ath12k_mac_remove_link_interface().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
