| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Plex Media Server before 1.43.3.10861 does not correctly neutralize URL values included in 'searchOne,' allowing an attacker to call other plugins' functions and supply their own parameters. |
| Plex Media Server before 1.43.3.10861 allows SSRF via '/player/timeline'. An attacker using any X-Plex-Token value can include a full URL in the 'protocol' parameter and force the Plex server to POST to the attacker's chosen destination. |
| The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running.
The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good.
With the pool exhausted, HFP command sending fails permanently, and because hfp_hf_send_cmd() allocates with K_FOREVER (bt_rfcomm_create_pdu() → bt_conn_create_pdu()) from the Bluetooth RX context — where that timeout is not downgraded to K_NO_WAIT — one further +BCS from the peer parks the Bluetooth RX thread inside net_buf_alloc() with no possible waker, halting all HCI event processing until the device is rebooted. Separately, reusing the HF slot while a work handler was still queued or running allowed memset() to wipe live k_work items out from under the system workqueue, corrupting shared kernel workqueue state. Exploitation requires an established HFP session (for SSP devices L2CAP enforces authentication before the RFCOMM channel is reachable) and a build with CONFIG_BT_HFP_HF enabled. |
| Missing Authentication for a Critical Function in certain ASUS routers allows an unauthorized nearby user to send specific commands via HTTP requests, causing the router to return device identification information and switch into a specific mode. As a result, when the router encounters abnormal conditions, it may be unable to perform self-recovery.
Refer to the '
Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread.
An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing.
Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service.
The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated. |
| Missing authorization in the WhatsApp group channel in Kiro Crew might allow a remote actor who is a member of an operator-configured WhatsApp group to control the operator's other agent sessions and execute arbitrary commands on the host running Kiro Crew via messages sent to the group.
To remediate this issue, users should upgrade to version 0.7.2. |
| fast-uri is a dependency-free RFC 3986 URI parser and serializer for Node.js. In versions before 2.4.8, from 3.0.0 through 3.1.8, and from 4.0.0 through 4.2.2, fast-uri percent-decodes the scheme component with the legacy global unescape() function before validating it, so an input whose decoded scheme is a dangerous token is emitted as a live scheme even though RFC 3986 does not allow percent-encoding in a scheme and no other parser accepts it. An application that screens dangerous schemes on the raw input and then stores or renders the normalized or resolved result can turn an inert string into an executable javascript, data, or vbscript URL, producing a stored or reflected cross-site scripting vector, and the equal() comparison treats an encoded and a plain scheme as the same, which can bypass equality-based allowlists. The issue is fixed in fast-uri 2.4.8, 3.1.9, and 4.2.3, and users should upgrade to one of these versions or later. As a workaround, reject input whose scheme part contains a percent sign, or check the parsed scheme against an allowlist after normalization and use that same parsed result rather than the raw string. |
| Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.6 allow a local authenticated user to run code as the mail server's high-privileged accounts when the product is installed in a folder whose permissions are inherited from a writable parent, such as the root of a drive. The installer places the server's programs in the Bin folder of the program folder and gives neither the program folder nor Bin any permissions of their own, so they inherit the parent's. Under the default location, Program Files, ordinary users receive only read and execute and the configuration is not affected; but the installer accepts any path without warning, and a program folder at the root of an NTFS volume inherits write access for a broad group - Authenticated Users (Modify) on a Windows client, Users (create files and folders) on Windows Server. A local user without administrator rights can then alter or replace the service program, which runs as LocalSystem or as the service's virtual account, or the programs an administrator runs elevated from Bin during setup and maintenance, or place a library in Bin that those programs load in place of the system copy, gaining code execution with those privileges. The default Program Files installation is not affected. |
| A user can upload export reports with any file contents and specify any contents. JSP code can be uploaded, JSPX can be specified as the file extension, and anyone can browse to the uploaded file, leading to command execution. The authentication bypass vulnerability can be chained with this vulnerability to run code on the server without authentication. |
| An unauthenticated user can send a DWR request with isPasswordUppercase as one call method and the next call method can be set to a run workflow rule. This allows for workflow rules to be run without authentication. |
| The carbon console accepts user-supplied XML input without sufficiently encoding potentially executable content, allowing for the injection of malicious scripts.
Successful exploitation allows a remote attacker to execute arbitrary JavaScript in the context of a victim's browser, leading to actions such as redirecting the user to a malicious website or modifying the web page's user interface. Session hijacking is not possible as sensitive session cookies are protected by the httpOnly flag. |
| Tokens associated with user sessions are not revoked when the corresponding user session is terminated, unless another SSO request is initiated. This occurs when the session-bound token feature is enabled with token binding validation and the "Revoke token upon user logout" option is not active. The software fails to automatically invalidate session-bound tokens upon user session termination.
This vulnerability exists when token binding validation is enabled. As a result, a malicious actor possessing a valid session-bound token could exploit this condition to maintain unauthorized access to applications and resources even after the associated user session has ended, potentially leading to the exposure of sensitive user data. |
| When built with wolfSSL, curl can successfully validate a pinned public key
hash against a key the TLS peer does not possess. During the TLS handshake,
wolfSSL validates the connection, but curl's subsequent re-parsing of the same
certificate - tricked by a manipulated validity length field - extracts and
matches a different embedded key, incorrectly authorizing the pinned public
key. |
| The parser in PEAK-System PCAN driver correctly detected the malformed record, but the loop iterating the record list advanced its processed-bytes counter even when a record had been rejected as invalid. |
| Joomla Extension - lomart.fr - Various SQL injection vectors in UP plugin extension 5.0.0-5.2.0, 6.0.0-6.0.29 |
| When libcurl uses libssh2 with a hashed `known_hosts` file, an unrelated
initial entry can cause host key validation to report a key *mismatch* as a
*missing* key to the `CURLOPT_SSH_KEYFUNCTION` callback. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix a refcount leak in attach_perf_ctx_data()
The attach_perf_ctx_data() can race on global and !global cases. The
global case is protected by global_ctx_data_rwsem and shares a single
reference count using perf_ctx_data.global field.
But when it races with !global case, it may miss to set the global field
and result in a reference count leak.
CPU1 CPU2
----------------------------------------------------------------
attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0)
cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data();
// { .global = 0, .refcount = 1 };
try_cmpxchg(); // success,
// task->perf_ctx_data = cd2
try_cmpxhg(); // fail; old = cd2
refcount_inc_not_zero(&old->refcount); // success
// old.refcount = 2
free_perf_ctx_data(cd1);
Then later detach_global_ctx_data() will see the data but it's not
marked as global, so it won't call detach_task_ctx_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix sbi->pipe file reference leak in autofs_kill_sb()
When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for
example, when find_get_pid() fails on an invalid pgrp mount option, or
when an fs_context is closed before mounting), deactivate_locked_super()
invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi).
Because AUTOFS_SBI_CATATONIC is still set in sbi->flags,
autofs_catatonic_mode() returns early without calling fput(sbi->pipe),
permanently leaking the pipe struct file reference.
Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL
after autofs_catatonic_mode(). |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix skb UAF and leaks on llc_mac_hdr_init() failure
In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init()
fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks
the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu),
and double-frees skb when llc_conn_state_process() drops its reference.
In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is
leaked if llc_mac_hdr_init() returns an error.
Free nskb in all three error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: reject TSO packets with an out of range MSS
gve_prep_tso() notes that the device requires the MSS to be <= 9728,
but does not enforce it, assuming the 9K MTU enforced by the hypervisor
and the 64KB limit on TSO sizes are enough.
This does not hold for packets that were not generated locally.
A guest behind a tap, or any packet socket user, can provide an
arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check
the MTU for GSO packets (is_skb_forwardable()), and gso_features_check()
only bounds skb->len and gso_segs, never gso_size.
Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size
into the mss field of the TSO context descriptor. This field is 14 bits
wide, so a gso_size of 16384 is silently turned into an MSS of zero.
Drop these packets from gve_prep_tso(), and make sure that
gve_features_check_dqo() leaves their GSO bits alone: skb_segment()
splits at gso_size regardless of the MTU, so falling back to software
segmentation would give the device non TSO packets bigger than the
9728 bytes it supports.
Note that the device can still be given oversized non TSO packets when
the stack segments in software for other reasons, for instance after
TSO has been disabled with ethtool. This is a generic issue, because
the MTU check is skipped for GSO packets in the forwarding path, and
is addressed separately. |
