| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Incomplete Cleanup vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows a configured MVPN neighbor to cause a denial of service via a BGP MVPN update when an inter‑region segmented VRF with 'protocols mvpn inter-region-template' is configured. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated configured MSDP peer or adjacent PIM sender to cause a denial of service via an MSDP or PIM policy that uses AS-path expansion. |
| Buffer underwrite ('buffer underflow') in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause a denial of service when multiple UPDATEs occur over a single TCP session with 'bgp family l2vpn auto-discovery-only' configured. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| An Incorrect Calculation of Buffer Size vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP neighbor to cause an rpd crash via BGP labeled-unicast UPDATEs when the affected multipath features are enabled. |
| An Improper Control of a Resource Through its Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent eBGP peer to cause a routing-daemon crash via a BGP route update when RIB sharding is enabled. |
| A Mismatched Memory Management Routines vulnerability in the routing protocol daemon (rpd) process of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker to cause a denial of service via a BGP route update when extended next-hop tunneling and SRv6 service processing are used. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| An Integer Overflow or Wraparound vulnerability in the routing daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated BGP peer to cause a denial of service via BGP route updates when extended-nexthop-tunnel is enabled. |
| A Reachable Assertion vulnerability in fwstatsd of Juniper Networks Junos OS Evolved allows an authenticated network attacker to cause a denial of service via an SNMP firewall-counter MIB query when at least one firewall counter is configured. |
| A Reachable Assertion vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker with access to a configured BGP-LS peer to cause an rpd crash via a crafted BGP-LS Link NLRI advertisements. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| A Reachable Assertion vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker to cause a denial of service via BGP-LS routing updates. |
| A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial-of-service condition via a malformed PIM Bidir message. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| The STM32WBA IEEE 802.15.4 driver in drivers/ieee802154/ieee802154_stm32wba.c computed the packet length of a received frame as pkt_len = rx_frame->length - IEEE802154_FCS_LENGTH without first checking that the radio-reported length could hold an FCS. pkt_len is a uint8_t, so a reported length of 0 or 1 wrapped to 254 or 255. The only bound on the resulting value was __ASSERT_NO_MSG(pkt_len <= CONFIG_NET_BUF_DATA_SIZE), which compiles to nothing in the default production configuration (CONFIG_ASSERT=n).
The length originates in the ST link-layer receive-done metadata (p_metadata->length, stored by stm32wba_802154_receive_done()), and ultimately in the PHY header of a frame received over the air, so it is influenced by any attacker within radio range of the device. Reaching the underflow requires the vendor link layer to surface a frame shorter than the FCS with no error; the driver performed no validation of its own on that value.
When the underflow occurs, stm32wba_802154_rx_thread() calls net_pkt_write(pkt, rx_frame->psdu, pkt_len) with a length of about 254 bytes against a receive buffer that holds at most one PHY packet (IEEE802154_MAX_PHY_PACKET_SIZE, 127 bytes). This reads roughly 128 bytes past the end of the radio receive buffer and copies that adjacent memory into a network packet that is submitted to the networking stack, giving an out-of-bounds read with a potential disclosure of adjacent RAM plus needless oversized packet allocation in the RX thread.
The fix rejects a frame whose reported length is smaller than IEEE802154_FCS_LENGTH before the subtraction, and replaces the compiled-out assertion with a runtime length check that drops oversized frames — matching the runtime check already present in drivers/ieee802154/ieee802154_nrf5.c. |
| The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped.
An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required.
With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected. |
| ethernet_recv() in subsys/net/l2/ethernet/ethernet.c validates only that the first net_buf of a received frame holds a plain 14-byte struct net_eth_hdr. When the ethertype is 0x8100 and VLAN is enabled on the interface, the same buffer is reinterpreted as the 18-byte struct net_eth_vlan_hdr without re-checking the length: the VLAN TCI and the inner ethertype are read from offsets 14..17, past pkt->buffer->len, and hdr_len is raised to 18 so the subsequent net_buf_pull() removes more bytes than the buffer holds.
A single unauthenticated frame of 14 to 17 bytes carrying the VLAN ethertype triggers this. No knowledge of the node's VLAN configuration is needed: net_eth_get_vlan_iface() returns the base interface for the priority tag 0, and a broadcast destination address satisfies the "frame is for me" test, so a 16-byte broadcast frame with ethertype 0x8100 and TCI 0x0000 reaches the pull. Nothing in the receive path enforces the 60-byte Ethernet minimum — the USB CDC ECM and CDC NCM gadget classes in particular hand host-supplied frames of any non-zero length straight to net_recv_data().
With assertions enabled, net_buf_simple_pull() asserts and the node panics. In a production build (assertions and CONFIG_NET_BUF_HARDENING off) the uint16_t buffer length underflows to 65534 and buf->data is advanced past the end of the fragment's storage, so every later parser reads far outside the buffer and any net_buf_add() on that fragment computes tailroom from the underflowed length. The result is a reliable remote denial of service and out-of-bounds access with information-disclosure and corruption potential.
Only configurations built with CONFIG_NET_VLAN=y that have a VLAN enabled on the receiving Ethernet interface, and whose MAC does not strip VLAN tags in hardware (ETHERNET_HW_VLAN_TAG_STRIP), are affected. The fix rejects the frame before the tag is read, so hdr_len is thereafter either 14 or 18 with both sizes validated against pkt->buffer->len. |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255.
Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array.
The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact.
The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. |
