| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| Unspecified vulnerability in the Skin Manager in DotNetNuke before 4.8.2 allows remote authenticated administrators to perform "server-side execution of application logic" by uploading a static file that is converted into a dynamic script via unknown vectors related to HTM or HTML files. |
| Unspecified vulnerability in DotNetNuke 4.0 through 4.8.4 and 5.0 allows remote attackers to obtain sensitive information (portal number) by accessing the install wizard page via unknown vectors. |
| Unspecified vulnerability in DotNetNuke 4.4.1 through 4.8.4 allows remote authenticated users to bypass authentication and gain privileges via unknown vectors related to a "unique id" for user actions and improper validation of a "user identity." |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fcloop: Check remoteport port_state before calling done callback
In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when
remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the
nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to
fail and the nvme-fc transport layer itself will directly call
nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free
the lsrsp resources.
Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.
If online, then lsrsp->done callback will free the lsrsp. Else, return
-ENODEV to signal the nvme-fc transport to handle freeing lsrsp. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mseal: update VMA end correctly on merge
Previously we stored the end of the current VMA in curr_end, and then upon
iterating to the next VMA updated curr_start to curr_end to advance to the
next VMA.
However, this doesn't take into account the fact that a VMA might be
updated due to a merge by vma_modify_flags(), which can result in curr_end
being stale and thus, upon setting curr_start to curr_end, ending up with
an incorrect curr_start on the next iteration.
Resolve the issue by setting curr_end to vma->vm_end unconditionally to
ensure this value remains updated should this occur.
While we're here, eliminate this entire class of bug by simply setting
const curr_[start/end] to be clamped to the input range and VMAs, which
also happens to simplify the logic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix constant blinding for PROBE_MEM32 stores
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/configfs: Free ctx_restore_mid_bb in release
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
(cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE
Adjust KVM's sanity check against overwriting a shadow-present SPTE with a
another SPTE with a different target PFN to only apply to direct MMUs,
i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM
to overwrite a shadow-present SPTE in response to a guest write, writes
from outside the scope of KVM, e.g. from host userspace, aren't detected
by KVM's write tracking and so can break KVM's shadow paging rules.
------------[ cut here ]------------
pfn != spte_to_pfn(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm]
Call Trace:
<TASK>
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]--- |
| An issue in the dither.c component of libsixel prior to v1.8.4 allows attackers to cause a denial of service (DOS) via a crafted PNG file. |
| An issue has been discovered in GitLab CE/EE affecting all versions starting from 11.8 before 16.1.5, all versions starting from 16.2 before 16.2.5, all versions starting from 16.3 before 16.3.1. A malicious Maintainer can, under specific circumstances, leak the sentry token by changing the configured URL in the Sentry error tracking settings page. This was as a result of an incomplete fix for CVE-2022-4365. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
libie: don't unroll if fwlog isn't supported
The libie_fwlog_deinit() function can be called during driver unload
even when firmware logging was never properly initialized. This led to call
trace:
[ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI
[ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full)
[ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020
[ 148.576182] RIP: 0010:__dev_printk+0x16/0x70
[ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98
[ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202
[ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000
[ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88
[ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000
[ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70
[ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8
[ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000
[ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0
[ 148.576252] Call Trace:
[ 148.576258] <TASK>
[ 148.576269] _dev_warn+0x7c/0x96
[ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog]
[ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe]
[ 148.576342] pci_device_remove+0x42/0xb0
[ 148.576354] device_release_driver_internal+0x19c/0x200
[ 148.576365] driver_detach+0x48/0x90
[ 148.576372] bus_remove_driver+0x6d/0xf0
[ 148.576383] pci_unregister_driver+0x2e/0xb0
[ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe]
[ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0
[ 148.576446] do_syscall_64+0x7f/0x980
It can be reproduced by trying to unload ixgbe driver in recovery mode.
Fix that by checking if fwlog is supported before doing unroll. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: fix ARM64 alignment fault in multipath hash seed
`struct sysctl_fib_multipath_hash_seed` contains two u32 fields
(user_seed and mp_seed), making it an 8-byte structure with a 4-byte
alignment requirement.
In `fib_multipath_hash_from_keys()`, the code evaluates the entire
struct atomically via `READ_ONCE()`:
mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed;
While this silently works on GCC by falling back to unaligned regular
loads which the ARM64 kernel tolerates, it causes a fatal kernel panic
when compiled with Clang and LTO enabled.
Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire
when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire
instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs
under Clang LTO. Since the macro evaluates the full 8-byte struct,
Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly
requires `ldar` to be naturally aligned, thus executing it on a 4-byte
aligned address triggers a strict Alignment Fault (FSC = 0x21).
Fix the read side by moving the `READ_ONCE()` directly to the `u32`
member, which emits a safe 32-bit `ldar Wn`.
Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire
struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis
shows that Clang splits this 8-byte write into two separate 32-bit
`str` instructions. While this avoids an alignment fault, it destroys
atomicity and exposes a tear-write vulnerability. Fix this by
explicitly splitting the write into two 32-bit `WRITE_ONCE()`
operations.
Finally, add the missing `READ_ONCE()` when reading `user_seed` in
`proc_fib_multipath_hash_seed()` to ensure proper pairing and
concurrency safety. |
