| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: ensure the allocated report buffer can contain the reserved report ID
When the report ID is not used, the low level transport drivers expect
the first byte to be 0. However, currently the allocated buffer not
account for that extra byte, meaning that instead of having 8 guaranteed
bytes for implement to be working, we only have 7. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: Revert "soundwire: qcom: Add set_channel_map api support"
This reverts commit 7796c97df6b1b2206681a07f3c80f6023a6593d5.
This patch broke Dragonboard 845c (sdm845). I see:
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f20003e8 [#1] SMP
pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom]
lr : snd_soc_dai_set_channel_map+0x34/0x78
Call trace:
qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P)
sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845]
snd_soc_link_init+0x28/0x6c
snd_soc_bind_card+0x5f4/0xb0c
snd_soc_register_card+0x148/0x1a4
devm_snd_soc_register_card+0x50/0xb0
sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845]
platform_probe+0x6c/0xd0
really_probe+0xc0/0x2a4
__driver_probe_device+0x7c/0x130
driver_probe_device+0x40/0x118
__device_attach_driver+0xc4/0x108
bus_for_each_drv+0x8c/0xf0
__device_attach+0xa4/0x198
device_initial_probe+0x18/0x28
bus_probe_device+0xb8/0xbc
deferred_probe_work_func+0xac/0xfc
process_one_work+0x244/0x658
worker_thread+0x1b4/0x360
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Kernel panic - not syncing: BRK handler: Fatal exception
Dan has also reported following issues with the original patch
https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/
Bug #1:
The zeroeth element of ctrl->pconfig[] is supposed to be unused. We
start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128.
Bug #2:
There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only
QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts
memory like Yongqin Liu pointed out.
Bug 3:
Like Jie Gan pointed out, it erases all the tx information with the rx
information. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_qfq: Fix race condition on qfq_aggregate
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Fix various oops due to inet_sock type confusion.
syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while
freeing inet_sk(sk)->inet_opt.
The address was freed multiple times even though it was read-only memory.
cipso_v4_sock_setattr() did nothing wrong, and the root cause was type
confusion.
The cited commit made it possible to create smc_sock as an INET socket.
The issue is that struct smc_sock does not have struct inet_sock as the
first member but hijacks AF_INET and AF_INET6 sk_family, which confuses
various places.
In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(),
which is an address of a function in the text segment.
$ pahole -C inet_sock vmlinux
struct inet_sock {
...
struct ip_options_rcu * inet_opt; /* 784 8 */
$ pahole -C smc_sock vmlinux
struct smc_sock {
...
void (*clcsk_data_ready)(struct sock *); /* 784 8 */
The same issue for another field was reported before. [2][3]
At that time, an ugly hack was suggested [4], but it makes both INET
and SMC code error-prone and hard to change.
Also, yet another variant was fixed by a hacky commit 98d4435efcbf3
("net/smc: prevent NULL pointer dereference in txopt_get").
Instead of papering over the root cause by such hacks, we should not
allow non-INET socket to reuse the INET infra.
Let's add inet_sock as the first member of smc_sock.
[0]:
kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73
WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
Modules linked in:
CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955
sp : ffff8000a03a7730
x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3
x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00
x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0
x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff
x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c
x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000
x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360
x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000
Call trace:
kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P)
cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914
netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000
smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581
smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912
security_inode_setsecurity+0x118/0x3c0 security/security.c:2706
__vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251
__vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295
vfs_setxattr+0x158/0x2ac fs/xattr.c:321
do_setxattr fs/xattr.c:636 [inline]
file_setxattr+0x1b8/0x294 fs/xattr.c:646
path_setxattrat+0x2ac/0x320 fs/xattr.c:711
__do_sys_fsetxattr fs/xattr.c:761 [inline]
__se_sys_fsetxattr fs/xattr.c:758 [inline]
__arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879
el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Correct signedness in skb remaining space calculation
Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow.
When we send data, if an skb exists at the tail of the write queue, the
kernel will attempt to append the new data to that skb. However, the code
that checks for available space in the skb is flawed:
'''
copy = size_goal - skb->len
'''
The types of the variables involved are:
'''
copy: ssize_t (s64 on 64-bit systems)
size_goal: int
skb->len: unsigned int
'''
Due to C's type promotion rules, the signed size_goal is converted to an
unsigned int to match skb->len before the subtraction. The result is an
unsigned int.
When this unsigned int result is then assigned to the s64 copy variable,
it is zero-extended, preserving its non-negative value. Consequently, copy
is always >= 0.
Assume we are sending 2GB of data and size_goal has been adjusted to a
value smaller than skb->len. The subtraction will result in copy holding a
very large positive integer. In the subsequent logic, this large value is
used to update sk->sk_forward_alloc, which can easily cause it to overflow.
The syzkaller reproducer uses TCP_REPAIR to reliably create this
condition. However, this can also occur in real-world scenarios. The
tcp_bound_to_half_wnd() function can also reduce size_goal to a small
value. This would cause the subsequent tcp_wmem_schedule() to set
sk->sk_forward_alloc to a value close to INT_MAX. Further memory
allocation requests would then cause sk_forward_alloc to wrap around and
become negative.
[1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix transport_* TOCTOU
Transport assignment may race with module unload. Protect new_transport
from becoming a stale pointer.
This also takes care of an insecure call in vsock_use_local_transport();
add a lockdep assert.
BUG: unable to handle page fault for address: fffffbfff8056000
Oops: Oops: 0000 [#1] SMP KASAN
RIP: 0010:vsock_assign_transport+0x366/0x600
Call Trace:
vsock_connect+0x59c/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU
syzbot reports that defer/local task_work adding via msg_ring can hit
a request that has been freed:
CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
io_req_local_work_add io_uring/io_uring.c:1184 [inline]
__io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252
io_msg_remote_post io_uring/msg_ring.c:103 [inline]
io_msg_data_remote io_uring/msg_ring.c:133 [inline]
__io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151
io_msg_ring_data io_uring/msg_ring.c:173 [inline]
io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314
__io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739
io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762
io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874
io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642
io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
which is supposed to be safe with how requests are allocated. But msg
ring requests alloc and free on their own, and hence must defer freeing
to a sane time.
Add an rcu_head and use kfree_rcu() in both spots where requests are
freed. Only the one in io_msg_tw_complete() is strictly required as it
has been visible on the other ring, but use it consistently in the other
spot as well.
This should not cause any other issues outside of KASAN rightfully
complaining about it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: fix potential out-of-bounds page table access during batched unmap
As pointed out by David[1], the batched unmap logic in
try_to_unmap_one() may read past the end of a PTE table when a large
folio's PTE mappings are not fully contained within a single page
table.
While this scenario might be rare, an issue triggerable from userspace
must be fixed regardless of its likelihood. This patch fixes the
out-of-bounds access by refactoring the logic into a new helper,
folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the
scan at both the VMA and PMD boundaries. To simplify the code, it also
supports partial batching (i.e., any number of pages from 1 up to the
calculated safe maximum), as there is no strong reason to special-case
for fully mapped folios. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
When num_parents is 4, __clk_register() occurs an out-of-bounds
when accessing parent_names member. Use ARRAY_SIZE() instead of
hardcode number here.
BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8
Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59
Hardware name: NXP i.MX95 19X19 board (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x8c/0xcc
print_report+0x398/0x5fc
kasan_report+0xd4/0x114
__asan_report_load8_noabort+0x20/0x2c
__clk_register+0x1844/0x20d8
clk_hw_register+0x44/0x110
__clk_hw_register_mux+0x284/0x3a8
imx95_bc_probe+0x4f4/0xa70 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix potential use-after-free in oplock/lease break ack
If ksmbd_iov_pin_rsp return error, use-after-free can happen by
accessing opinfo->state and opinfo_put and ksmbd_fd_put could
called twice. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: vector: Fix context save/restore with xtheadvector
Previously only v0-v7 were correctly saved/restored,
and the context of v8-v31 are damanged.
Correctly save/restore v8-v31 to avoid breaking userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "riscv: Define TASK_SIZE_MAX for __access_ok()"
This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: xsk: rx: fix the frame's length check
When calling buf_to_xdp, the len argument is the frame data's length
without virtio header's length (vi->hdr_len). We check that len with
xsk_pool_get_rx_frame_size() + vi->hdr_len
to ensure the provided len does not larger than the allocated chunk
size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk,
we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost
to start placing data from
hard_start + XDP_PACKET_HEADROOM - vi->hdr_len
not
hard_start + XDP_PACKET_HEADROOM
But the first buffer has virtio_header, so the maximum frame's length in
the first buffer can only be
xsk_pool_get_rx_frame_size()
not
xsk_pool_get_rx_frame_size() + vi->hdr_len
like in the current check.
This commit adds an additional argument to buf_to_xdp differentiate
between the first buffer and other ones to correctly calculate the maximum
frame's length. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qpic-snand: reallocate BAM transactions
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix iteration of extrefs during log replay
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix warning when reconnecting channel
When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.
Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.
WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS: 0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
queue_delayed_work_on+0xb4/0xc0
smb2_reconnect+0xb22/0xf50 [cifs]
smb2_reconnect_server+0x413/0xd40 [cifs]
? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
? local_clock_noinstr+0xd/0xd0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
process_one_work+0x4c5/0xa10
? __pfx_process_one_work+0x10/0x10
? __list_add_valid_or_report+0x37/0x120
worker_thread+0x2f1/0x5a0
? __kthread_parkme+0xde/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1fe/0x380
? kthread+0x10f/0x380
? __pfx_kthread+0x10/0x10
? local_clock_noinstr+0xd/0xd0
? ret_from_fork+0x1b/0x1f0
? local_clock+0x15/0x30
? lock_release+0x29b/0x390
? rcu_is_watching+0x20/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork+0x15b/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1116206
hardirqs last enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
rose: fix dangling neighbour pointers in rose_rt_device_down()
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Avoid overflow with array index
The variable index is modified and reused as array index when modify
register EIOINTC_ENABLE. There will be array index overflow problem. |
