| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix use-after-free when volume resizing failed
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
CPU: 2 PID: 4735 Comm: ubirsvol
Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
ubi_eba_copy_table+0x11f/0x1c0 [ubi]
ubi_resize_volume+0x4f9/0xbc0 [ubi]
ubi_cdev_ioctl+0x701/0x1850 [ubi]
__x64_sys_ioctl+0x11d/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix session state check in reconnect to avoid use-after-free issue
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.
Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zeroing allocated object from slab in bpf memory allocator
Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:
NMI backtrace for cpu 16
CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
......
Call Trace:
<TASK>
copy_map_value_locked+0xb7/0x170
bpf_map_copy_value+0x113/0x3c0
__sys_bpf+0x1c67/0x2780
__x64_sys_bpf+0x1c/0x20
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
......
</TASK>
For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: don't assume adequate headroom for SDIO headers
mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and
mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that
adequate headroom will be available in the passed skb. This assumption
typically is satisfied when the skb was allocated in the net core for
transmission via the mt7921 netdev (although even that is only an
optimization and is not strictly guaranteed), but the assumption is
sometimes not satisfied when the skb originated in the receive path of
another netdev and was passed through to the mt7921, such as by the
bridge layer. Blindly prepending bytes to an skb is always wrong.
This commit introduces a call to skb_cow_head() before the call to
mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to
ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be
pushed onto the skb.
Without this fix, I can trivially cause kernel panics by bridging an
MT7921AU-based USB 802.11ax interface with an Ethernet interface on an
Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet
adapter and also on an ARM-based Raspberry Pi 1 using its onboard
SMSC9512 USB Ethernet adapter. Note that the panics do not occur in
every system configuration, as they occur only if the receiving netdev
leaves less headroom in its received skbs than the mt7921 needs for its
SDIO headers.
Here is an example stack trace of this panic on Raspberry Pi OS Lite
2023-02-21 running kernel 6.1.24+ [1]:
skb_panic from skb_push+0x44/0x48
skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common]
mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb]
mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76]
__mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76]
mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76]
mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common]
mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76]
__mt76_worker_fn [mt76] from kthread+0xbc/0xe0
kthread from ret_from_fork+0x14/0x34
After this fix, bridging the mt7921 interface works fine on both of my
previously problematic systems.
[1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Handle lock during peer_id find
ath12k_peer_find_by_id() requires that the caller hold the
ab->base_lock. Currently the WBM error path does not hold
the lock and calling that function, leads to the
following lockdep_assert()in QCN9274:
[105162.160893] ------------[ cut here ]------------
[105162.160916] WARNING: CPU: 3 PID: 0 at drivers/net/wireless/ath/ath12k/peer.c:71 ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160933] Modules linked in: ath12k(O) qrtr_mhi qrtr mac80211 cfg80211 mhi qmi_helpers libarc4 nvme nvme_core [last unloaded: ath12k(O)]
[105162.160967] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W O 6.1.0-rc2+ #3
[105162.160972] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0056.2019.0506.1527 05/06/2019
[105162.160977] RIP: 0010:ath12k_peer_find_by_id+0x52/0x60 [ath12k]
[105162.160990] Code: 07 eb 0f 39 68 24 74 0a 48 8b 00 48 39 f8 75 f3 31 c0 5b 5d c3 48 8d bf b0 f2 00 00 be ff ff ff ff e8 22 20 c4 e2 85 c0 75 bf <0f> 0b eb bb 66 2e 0f 1f 84 00 00 00 00 00 41 54 4c 8d a7 98 f2 00
[105162.160996] RSP: 0018:ffffa223001acc60 EFLAGS: 00010246
[105162.161003] RAX: 0000000000000000 RBX: ffff9f0573940000 RCX: 0000000000000000
[105162.161008] RDX: 0000000000000001 RSI: ffffffffa3951c8e RDI: ffffffffa39a96d7
[105162.161013] RBP: 000000000000000a R08: 0000000000000000 R09: 0000000000000000
[105162.161017] R10: ffffa223001acb40 R11: ffffffffa3d57c60 R12: ffff9f057394f2e0
[105162.161022] R13: ffff9f0573940000 R14: ffff9f04ecd659c0 R15: ffff9f04d5a9b040
[105162.161026] FS: 0000000000000000(0000) GS:ffff9f0575600000(0000) knlGS:0000000000000000
[105162.161031] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105162.161036] CR2: 00001d5c8277a008 CR3: 00000001e6224006 CR4: 00000000003706e0
[105162.161041] Call Trace:
[105162.161046] <IRQ>
[105162.161051] ath12k_dp_rx_process_wbm_err+0x6da/0xaf0 [ath12k]
[105162.161072] ? ath12k_dp_rx_process_err+0x80e/0x15a0 [ath12k]
[105162.161084] ? __lock_acquire+0x4ca/0x1a60
[105162.161104] ath12k_dp_service_srng+0x263/0x310 [ath12k]
[105162.161120] ath12k_pci_ext_grp_napi_poll+0x1c/0x70 [ath12k]
[105162.161133] __napi_poll+0x22/0x260
[105162.161141] net_rx_action+0x2f8/0x380
[105162.161153] __do_softirq+0xd0/0x4c9
[105162.161162] irq_exit_rcu+0x88/0xe0
[105162.161169] common_interrupt+0xa5/0xc0
[105162.161174] </IRQ>
[105162.161179] <TASK>
[105162.161184] asm_common_interrupt+0x22/0x40
Handle spin lock/unlock in WBM error path to hold the necessary lock
expected by ath12k_peer_find_by_id().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-03171-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix mapping to non-allocated address
[Why]
There is an issue mapping non-allocated location of memory.
It would allocate gpio registers from an array out of bounds.
[How]
Patch correct numbers of bounds for using. |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119
Call Trace:
<TASK>
__asan_report_load4_noabort (mm/kasan/report_generic.c:380)
vcs_size (drivers/tty/vt/vc_screen.c:215)
vcs_write (drivers/tty/vt/vc_screen.c:664)
vfs_write (fs/read_write.c:582 fs/read_write.c:564)
...
<TASK>
Allocated by task 1213:
kmalloc_trace (mm/slab_common.c:1064)
vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680
drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058)
con_install (drivers/tty/vt/vt.c:3334)
tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415
drivers/tty/tty_io.c:1392)
tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128)
chrdev_open (fs/char_dev.c:415)
do_dentry_open (fs/open.c:921)
vfs_open (fs/open.c:1052)
...
Freed by task 4116:
kfree (mm/slab_common.c:1016)
vc_port_destruct (drivers/tty/vt/vt.c:1044)
tty_port_destructor (drivers/tty/tty_port.c:296)
tty_port_put (drivers/tty/tty_port.c:312)
vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2))
vt_ioctl (drivers/tty/vt/vt_ioctl.c:903)
tty_ioctl (drivers/tty/tty_io.c:2778)
...
The buggy address belongs to the object at ffff8880beab8800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)
The buggy address belongs to the physical page:
page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0xbeab8
head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0
pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:
| BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
|
| CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
| Call trace:
| dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
| show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
| __dump_stack lib/dump_stack.c:88 [inline]
| dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
| print_address_description mm/kasan/report.c:351 [inline]
| print_report+0x174/0x514 mm/kasan/report.c:462
| kasan_report+0xd4/0x130 mm/kasan/report.c:572
| kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
| __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
| do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| csum_partial+0x30/0x58 lib/checksum.c:128
| gso_make_checksum include/linux/skbuff.h:4928 [inline]
| __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
| udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
| ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
| skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
| __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
| skb_gso_segment include/linux/netdevice.h:4859 [inline]
| validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
| validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
| sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
| __dev_xmit_skb net/core/dev.c:3805 [inline]
| __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
| dev_queue_xmit include/linux/netdevice.h:3085 [inline]
| packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
| packet_snd net/packet/af_packet.c:3081 [inline]
| packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
| sock_sendmsg_nosec net/socket.c:724 [inline]
| sock_sendmsg net/socket.c:747 [inline]
| __sys_sendto+0x3b4/0x538 net/socket.c:2144
Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:
| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
| __kmalloc+0x8c/0xcc
| do_sme_acc+0x9c/0x220
| ...
Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.
[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix refcount underflow in error path
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix skb_copy_ubufs() vs BIG TCP
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.
skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.
This assumption broke when BIG TCP was able to put up to 512 KB per skb.
We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.
A solution is to use higher order pages if needed.
v2: add missing __GFP_COMP, or we leak memory. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix out-of-bounds when setting channels on remove
If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
Reproducer:
[root@host ~]# cat repro.sh
#!/bin/bash
pf_dbsf="0000:41:00.0"
vf0_dbsf="0000:41:02.0"
g_pids=()
function do_set_numvf()
{
echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
}
function do_set_channel()
{
local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
[ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
ifconfig $nic 192.168.18.5 netmask 255.255.255.0
ifconfig $nic up
ethtool -L $nic combined 1
ethtool -L $nic combined 4
sleep $((RANDOM%3))
}
function on_exit()
{
local pid
for pid in "${g_pids[@]}"; do
kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
done
g_pids=()
}
trap "on_exit; exit" EXIT
while :; do do_set_numvf ; done &
g_pids+=($!)
while :; do do_set_channel ; done &
g_pids+=($!)
wait
Result:
[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851] dump_stack+0x71/0xab
[ 3510.400860] print_address_description+0x6b/0x290
[ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868] kasan_report+0x14a/0x2b0
[ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891] ? wait_woken+0x1d0/0x1d0
[ 3510.400895] ? notifier_call_chain+0xc1/0x130
[ 3510.400903] pci_device_remove+0xa8/0x1f0
[ 3510.400910] device_release_driver_internal+0x1c6/0x460
[ 3510.400916] pci_stop_bus_device+0x101/0x150
[ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924] pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929] ? pci_get_subsys+0x90/0x90
[ 3510.400932] sriov_disable+0xed/0x3e0
[ 3510.400936] ? bus_find_device+0x12d/0x1a0
[ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968] ? pci_get_device+0x7c/0x90
[ 3510.400970] ? pci_get_subsys+0x90/0x90
[ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001] sriov_numvfs_store+0x214/0x290
[ 3510.401005] ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011] ? __check_object_size+0x15a/0x350
[ 3510.401018] kernfs_fop_write+0x280/0x3f0
[ 3510.401022] vfs_write+0x145/0x440
[ 3510.401025] ksys_write+0xab/0x160
[ 3510.401028] ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031] ? fput_many+0x1a/0x120
[ 3510.401032] ? filp_close+0xf0/0x130
[ 3510.401038] do_syscall_64+0xa0/0x370
[ 3510.401041] ? page_fault+0x8/0x30
[ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: don't access released socket during error recovery
While the error recovery work is temporarily failing reconnect attempts,
running the 'nvme list' command causes a kernel NULL pointer dereference
by calling getsockname() with a released socket.
During error recovery work, the nvme tcp socket is released and a new one
created, so it is not safe to access the socket without proper check. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: cancel queued works in probe error path
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: fix wrong ct->timeout value
(struct nf_conn)->timeout is an interval before the conntrack
confirmed. After confirmed, it becomes a timestamp.
It is observed that timeout of an unconfirmed conntrack:
- Set by calling ctnetlink_change_timeout(). As a result,
`nfct_time_stamp` was wrongly added to `ct->timeout` twice.
- Get by calling ctnetlink_dump_timeout(). As a result,
`nfct_time_stamp` was wrongly subtracted.
Call Trace:
<TASK>
dump_stack_lvl
ctnetlink_dump_timeout
__ctnetlink_glue_build
ctnetlink_glue_build
__nfqnl_enqueue_packet
nf_queue
nf_hook_slow
ip_mc_output
? __pfx_ip_finish_output
ip_send_skb
? __pfx_dst_output
udp_send_skb
udp_sendmsg
? __pfx_ip_generic_getfrag
sock_sendmsg
Separate the 2 cases in:
- Setting `ct->timeout` in __nf_ct_set_timeout().
- Getting `ct->timeout` in ctnetlink_dump_timeout().
Pablo appends:
Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is
set on, otherwise conntrack creation via ctnetlink breaks.
Note that the problem described in this patch occurs since the
introduction of the nfnetlink_queue conntrack support, select a
sufficiently old Fixes: tag for -stable kernel to pick up this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: dlm: fix use after free in midcomms commit
While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:
[ 151.760477] ==================================================================
[ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347
[ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014
[ 151.768726] Call Trace:
[ 151.769277] <TASK>
[ 151.769748] dump_stack_lvl+0x5b/0x86
[ 151.770556] print_report+0x180/0x4c8
[ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0
[ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.773069] kasan_report+0x93/0x1a0
[ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.774514] __asan_load4+0x7e/0xa0
[ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0
[ 151.776770] send_common+0x19f/0x1b0
[ 151.777342] ? remove_from_waiters+0x60/0x60
[ 151.778017] ? lock_downgrade+0x410/0x410
[ 151.778648] ? __this_cpu_preempt_check+0x13/0x20
[ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0
[ 151.780292] _convert_lock+0x46/0x150
[ 151.780893] convert_lock+0x7b/0xc0
[ 151.781459] dlm_lock+0x3ac/0x580
[ 151.781993] ? 0xffffffffc0540000
[ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70
[ 151.784003] ? preempt_count_sub+0xd6/0x130
[ 151.784661] ? is_module_address+0x47/0x70
[ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.786166] ? 0xffffffffc0540000
[ 151.786693] ? lockdep_init_map_type+0xc3/0x360
[ 151.787414] ? 0xffffffffc0540000
[ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.789858] ? 0xffffffffc0540000
[ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[ 151.791347] ? delay_tsc+0x94/0xc0
[ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture]
[ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0
[ 151.797152] ? mark_held_locks+0x34/0xb0
[ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70
[ 151.798581] ? __kthread_parkme+0x79/0x110
[ 151.799246] ? trace_preempt_on+0x2a/0xf0
[ 151.799902] ? __kthread_parkme+0x79/0x110
[ 151.800579] ? preempt_count_sub+0xd6/0x130
[ 151.801271] ? __kasan_check_read+0x11/0x20
[ 151.801963] ? __kthread_parkme+0xec/0x110
[ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.803569] kthread+0x192/0x1d0
[ 151.804104] ? kthread_complete_and_exit+0x30/0x30
[ 151.804881] ret_from_fork+0x1f/0x30
[ 151.805480] </TASK>
[ 151.806111] Allocated by task 1347:
[ 151.806681] kasan_save_stack+0x26/0x50
[ 151.807308] kasan_set_track+0x25/0x30
[ 151.807920] kasan_save_alloc_info+0x1e/0x30
[ 151.808609] __kasan_slab_alloc+0x63/0x80
[ 151.809263] kmem_cache_alloc+0x1ad/0x830
[ 151.809916] dlm_allocate_mhandle+0x17/0x20
[ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260
[ 151.811344] _create_message+0x95/0x180
[ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0
[ 151.812880] send_common+0x129/0x1b0
[ 151.813467] _convert_lock+0x46/0x150
[ 151.814074] convert_lock+0x7b/0xc0
[ 151.814648] dlm_lock+0x3ac/0x580
[ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.817129] lock_t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix possible double unlock when moving a directory |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
If nf_conntrack_init_start() fails (for example due to a
register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()
clean-up path frees the nf_ct_helper_hash map.
When built with NF_CONNTRACK=y, further netfilter modules (e.g:
netfilter_conntrack_ftp) can still be loaded and call
nf_conntrack_helpers_register(), independently of whether nf_conntrack
initialized correctly. This accesses the nf_ct_helper_hash dangling
pointer and causes a uaf, possibly leading to random memory corruption.
This patch guards nf_conntrack_helper_register() from accessing a freed
or uninitialized nf_ct_helper_hash pointer and fixes possible
uses-after-free when loading a conntrack module. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would
cause kernel panic because cmd->device may be freed after returning from
scsi_dispatch_cmd().
This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. |
