| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bounds check for skb-backed dynptrs
The skb_pointer_if_linear() function checks whether a
memory region of length len starting at offset off into
the skb is in the linear area, and returns a pointer to
the region if so. The check currently subtracts between
skb_headlen and offset of the check, and since skb_headlen
is unsigned the subtraction can underflow. This causes the
bounds check to spuriously pass and generate an arbitrary
pointer of the form *(skb->data + off).
The only user of this helper is currently skb-backed BPF
dynptr code. Returning the wrong pointer leads to the
dynptr erroneously being backed with invalid memory.
Ensure the subtraction cannot underflow, and fail the check if
it would. Use u64 arithmetic to also prevent overflow when
calculating (skb_headlen(skb) - off) since off is unsigned. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_sock context code generation
Currently, the ctx access code reads the rx_queue_mapping
field with either a 4-byte or 2-byte load. The rest of the bits
in the register are marked known zero by the verifier. However,
the emitted ctx access code places in the register on certain
the special value (-1) using BPF_MOV_IMM64, which gets sign-extended
to turn on all the bits in the register. By shifting this value right,
the program ends up with a value at runtime above what the verifier
assumes is possible.
Fix this by ensuring the read value is as wide as the assumed size.
Use MOV32 instructions instead of MOV64 instructions to keep
the upper bits zero as assumed by the verifier. Also properly report
the size of the destination variable (the bpf_sock field, 4 bytes) instead
of the source (the socket field, 2 bytes). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold asoc or transport before mod_timer() in timer handlers
Take the association or transport reference before rearming a timer in the
timer handlers.
The existing code calls mod_timer() before taking the reference needed by
the rearmed timer without holding the sock lock. This creates a race with
timer cleanup: if the timer is deleted after mod_timer() returns but before
the reference is taken, the cleanup path can drop the timer's reference and
destroy the transport or association. The timer handler then takes a
reference on the already freed object and eventually drops it, causing a
refcount underflow.
Hold the object before mod_timer() and drop the reference if mod_timer()
reports that the timer was already pending in timer handlers. Apply the
same ordering to the proto-unreachable path, which can rearm a transport
timer outside the timer handlers without holding the sock lock. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ISO15693 inventory length
The ISO15693 inventory helper removes a two-byte prefix without checking
that it exists, then accepts a one-byte remainder before reading data[1] as
the DSFID.
Require the prefix and at least two remaining bytes before copying the UID
data and reading the DSFID. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix slab-out-of-bounds reads when logging service names
nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null-
terminated strings to pr_debug() using the %s format specifier.
The buffers are allocated via kmemdup() or come from netlink
attributes and are not guaranteed to be null-terminated, causing
__dynamic_pr_debug() to read beyond the allocated region:
KASAN: slab-out-of-bounds Read in __dynamic_pr_debug
Fix both call sites by using %.*s with the explicit length to limit
the output to the actual length of the string. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid()
frame->ccid.datalen is read directly from the USB response frame
and used, unchecked, as an index into frame->data[]. A malicious or
malfunctioning device can set this field to an arbitrary value,
causing the driver to read far outside the received buffer.
Bound ccid.datalen against the maximum possible ACR122 frame size
before using it. This replaces the existing datalen == 0 check,
since datalen < 2 already covers that case and additionally
rejects datalen == 1, which would still underflow the
"datalen - 2" offset used below. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6()
skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max
argument and passes the result to __pskb_pull_tail() as a signed int. The
function does not ensure that max is at least skb_headlen(skb).
This can happen while parsing IPv6 extension headers when an skb already
has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data
beyond the linear area, max - skb_headlen(skb) wraps and is converted to a
negative delta. __pskb_pull_tail() then passes that negative length to
skb_copy_bits(), where it can become a very large copy length.
Pass the requested length itself as the pull bound at the three
extension-header call sites, so the delta can no longer go negative. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix immediate JMP JEQ/JNE on MIPS32
An addu instruction was emitted instead of addiu, causing the immediate
value 1 to be interpreted as register $at. This made the comparison
result invalid when the immediate operand was negative. Note that $at
is mapped to BPF_REG_AX, which is used for constant blinding.
Fix the instruction to use the immediate form.
Found with test_bpf on MIPS32r1 emulated by QEMU. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: clear stale buf->page after recycling on skb build failure
In stmmac_rx(), when napi_build_skb() fails the descriptor page is
recycled back to the page pool with page_pool_recycle_direct(), but
buf->page is left pointing at the recycled page, unlike every other
consumption site in the function which clears the pointer after handing
the page away.
With the stale pointer stmmac_rx_refill() skips the replacement
allocation and programs the already-recycled page back into the RX
descriptor.
Clear buf->page on the napi_build_skb() failure path to keep the buffer
lifecycle consistent with the other consumption sites. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: keep room for the mac header in dst_dev_overhead()
The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as
the length they are about to push plus dst_dev_overhead(), then push the
new headers and rebuild the mac header below them with
skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom,
but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device,
16 bytes for plain Ethernet.
Where the mac header is longer than that, as it is on ingress through a
VLAN device with reorder_hdr off, the rebuild runs out of room:
skb_set_mac_header(skb, -skb->mac_len) computes a negative offset,
stores it unchecked in the u16 skb->mac_header, and the memmove that
follows writes skb->mac_len bytes about 64 KB past skb->head.
Forwarding plain ping6 traffic through such a device reproduces it on
all five seg6 encapsulation modes and on the rpl and ioam6 inline paths;
skb->mac_header comes back as 65534 on a 704-byte head.
Return the larger of the two. The helper already returns skb->mac_len
when it has no dst, so this only makes the other branch agree, and it
covers every caller rather than each call site in turn. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: size a connection's path set by the transport it ends up with
__rds_conn_create() computes npaths from the caller's transport before
it decides whether a connection to one of the host's own addresses is
to be handled by the loopback transport instead. That substitution is
what an RDS/TCP socket sending to a local address gets, and after it
the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS
paths and allocates an ordered workqueue for each, while
rds_loop_conn_alloc() only ever provides transport data for path 0.
rds_conn_destroy() sizes its teardown from c_trans, by then the
loopback transport, so it visits path 0 only - and
rds_conn_path_destroy() would skip the other paths anyway, since it
returns before destroy_workqueue() for a path without transport data.
kfree(c_path) then drops the last pointers to seven workqueues. That
repeats for every such connection, on every netns teardown or module
unload, and every distinct local destination address is a separate
connection.
Recompute npaths once the transport is final, so that creation and
destruction agree on the set of paths. The c_path array stays sized
for the caller's transport; the unused entries are freed with it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: flush skb_defer_nodes in dev_cpu_dead()
When a CPU goes offline, dev_cpu_dead() drains its softnet queues
(completion_queue, output_queue, poll_list, process_queue, and
input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched.
If oldcpu goes offline while holding pending skbs in its
skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI
threshold, or if the IPI races with CPU teardown), those skbs remain
stranded until oldcpu is brought back online. If any of these skbs
hold page_pool fragments, page_pool_destroy() will stall indefinitely
waiting for inflight pages to be returned when a netdev or driver is
torn down while oldcpu is offline.
Additionally, if smp_call_function_single_async() fails in
kick_defer_list_purge() because the target CPU went offline, reset
defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the
CPU comes back online.
Also, if oldcpu was the last online CPU on its NUMA node, drain that
node's slot across all CPUs so no skbs deferred from that node remain
stranded on idle remote CPUs (or if the node itself is subsequently
offlined).
Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and
whether the caller migrated CPUs after llist_add(), flushing the node
list if so, to close the preemption TOCTOU race against CPU/node
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO
gve_can_send_tso() computes how many buffers each segment of a GSO
packet would span, and for this it needs the length of the headers
that the device replicates in front of every segment.
It unconditionally uses skb_tcp_all_headers(), which reads the doff
field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header:
tcp_hdrlen() then reads one byte of the UDP payload, and header_len
can be anything in [0, 60] instead of the transport offset plus the
eight bytes of the UDP header that gve_prep_tso() programs into the
TSO context descriptor.
A wrong header length shifts all the segment boundaries computed in
the loop, so the number of buffers per segment can be over or under
estimated. In the first case, GSO is needlessly disabled for this
packet by gve_features_check_dqo() and the stack has to segment it.
In the second case, the driver hands the device a packet whose
segments span more than GVE_TX_MAX_DATA_DESCS buffers.
Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what
gve_prep_tso() does. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: reject TSO packets with an out of range MSS
gve_prep_tso() notes that the device requires the MSS to be <= 9728,
but does not enforce it, assuming the 9K MTU enforced by the hypervisor
and the 64KB limit on TSO sizes are enough.
This does not hold for packets that were not generated locally.
A guest behind a tap, or any packet socket user, can provide an
arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check
the MTU for GSO packets (is_skb_forwardable()), and gso_features_check()
only bounds skb->len and gso_segs, never gso_size.
Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size
into the mss field of the TSO context descriptor. This field is 14 bits
wide, so a gso_size of 16384 is silently turned into an MSS of zero.
Drop these packets from gve_prep_tso(), and make sure that
gve_features_check_dqo() leaves their GSO bits alone: skb_segment()
splits at gso_size regardless of the MTU, so falling back to software
segmentation would give the device non TSO packets bigger than the
9728 bytes it supports.
Note that the device can still be given oversized non TSO packets when
the stack segments in software for other reasons, for instance after
TSO has been disabled with ethtool. This is a generic issue, because
the MTU check is skipped for GSO packets in the forwarding path, and
is addressed separately. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix skb UAF and leaks on llc_mac_hdr_init() failure
In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init()
fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks
the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu),
and double-frees skb when llc_conn_state_process() drops its reference.
In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is
leaked if llc_mac_hdr_init() returns an error.
Free nskb in all three error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: ensure sufficient headroom in vlan_dev_hard_header()
Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()),
or skbs allocated before dynamic device/headroom changes (e.g. toggling
VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach
vlan_dev_hard_header() with insufficient headroom and trigger
skb_under_panic().
Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR
is not set to ensure sufficient headroom for the VLAN header(s) and the
underlying device hard header.
Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as
they can be updated concurrently under RTNL (e.g. in
vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on
the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the
extra HH_DATA_MOD alignment padding does not trigger unnecessary
pskb_expand_head() reallocations on inner stacked VLAN devices after the
outer VLAN header has been pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix sbi->pipe file reference leak in autofs_kill_sb()
When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for
example, when find_get_pid() fails on an invalid pgrp mount option, or
when an fs_context is closed before mounting), deactivate_locked_super()
invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi).
Because AUTOFS_SBI_CATATONIC is still set in sbi->flags,
autofs_catatonic_mode() returns early without calling fput(sbi->pipe),
permanently leaking the pipe struct file reference.
Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL
after autofs_catatonic_mode(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix a refcount leak in attach_perf_ctx_data()
The attach_perf_ctx_data() can race on global and !global cases. The
global case is protected by global_ctx_data_rwsem and shares a single
reference count using perf_ctx_data.global field.
But when it races with !global case, it may miss to set the global field
and result in a reference count leak.
CPU1 CPU2
----------------------------------------------------------------
attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0)
cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data();
// { .global = 0, .refcount = 1 };
try_cmpxchg(); // success,
// task->perf_ctx_data = cd2
try_cmpxhg(); // fail; old = cd2
refcount_inc_not_zero(&old->refcount); // success
// old.refcount = 2
free_perf_ctx_data(cd1);
Then later detach_global_ctx_data() will see the data but it's not
marked as global, so it won't call detach_task_ctx_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fill branch entries with a single assignment
perf_clear_branch_entry_bitfields() clears the bitfields of struct
perf_branch_entry one by one and leaves from/to alone, since callers
overwrite those straight away. The list has to be kept in sync with the
struct by hand and has already fallen behind: new_type and priv were
added to perf_branch_entry and never added here.
Only BRBE writes those two, and neither for every record.
brbe_set_perf_entry_type() leaves new_type alone for a branch type it
does not recognise, and priv is not set for source-only records.
arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a
record reaches userspace with whatever the slot held: uninitialised
kmalloc() data on the first pass over the buffer, the previous record's
values after that. Nothing under arch/x86/events/ writes either field,
so only arm64 is affected.
Assign the whole entry at each site instead. Everything not named is
then zero, and there is no list to keep in sync. The bitfields add up to
exactly 64 bits, so the struct has no padding to leave undefined.
perf_clear_branch_entry_bitfields() has no callers left, so remove it.
perf_entry_from_brbe_regset() assigns an empty literal instead, since it
fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the
explicit spec assignment changes nothing. |
