Export limit exceeded: 430594 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 430594 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (341 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89683 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dentry ref leak on V4ROOT export filehandle lookup nfsd_set_fh_dentry() leaks the dentry reference from exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE switch cases detect NFSEXP_V4ROOT and goto out. The out: label calls exp_put() but never dput(dentry), and fhp->fh_dentry was never assigned so fh_put() cannot compensate. A crafted NFSv3 filehandle targeting a V4ROOT export's fsid triggers the leak on every request. | ||||
| CVE-2026-89590 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels] | ||||
| CVE-2026-89453 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Put PCI device after handling PPR faults iommu_call_iopf_notifier() looks up the requester with pci_get_domain_bus_and_slot(), which returns a PCI device with its reference count incremented. Neither the successful iommu_report_device_fault() path nor the abort path drops that reference, so every handled PPR request leaks a PCI device reference. This is the same ownership rule that was fixed for the old iommu_v2 ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was added later as a separate PPR/IOPF notifier path. Drop the PCI device reference after handling the PPR entry. | ||||
| CVE-2026-89447 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Avoid locking internal accesses during unmap iommufd_access_notify_unmap() skips internal accesses because they do not have an external unmap callback to invoke. However, the current test calls iommufd_lock_obj() before checking whether the access is internal. If iommufd_lock_obj() succeeds, the loop then sees the internal access and continues, bypassing the matching iommufd_put_object() used by the normal unmap path. This leaks the object reference taken by iommufd_lock_obj(). Check for internal accesses first so skipped entries are never locked. | ||||
| CVE-2026-64059 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". | ||||
| CVE-2026-80539 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: disallow multiple FENCE chunks in one submit amdgpu_cs_pass1() dispatches on chunk_id once per chunk without rejecting repeated ids. p->uf_bo is a single-slot field, so a submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs amdgpu_cs_p1_user_fence() twice, and the second run overwrites p->uf_bo with a freshly referenced BO without dropping the reference taken by the first. amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE chunk but the last leaks a BO reference. The leaked BO outlives handle close and process exit. Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did for p->bo_list. (cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) | ||||
| CVE-2026-74514 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current->mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequently free these resources when the pages are unpinned. [borntraeger@linux.ibm.com: Fixed whitespace] | ||||
| CVE-2026-74483 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't leak the user namespace when the mount fails bm_get_tree() takes a reference to the user namespace and hands it to get_tree_keyed() as the sget key. sget_fc() moves that reference into sb->s_fs_info and clears fc->s_fs_info, so from that point on the superblock owns it and bm_free() doesn't see it anymore. The superblock drops it in ->put_super(). But generic_shutdown_super() only calls ->put_super() from inside the if (sb->s_root) branch, so nothing releases it when bm_fill_super() fails: - The kzalloc_obj() failure leaves s_root NULL and the whole branch is skipped. - A simple_fill_super() failure in the file loop leaves s_root set, but s_op still points at simple_super_operations, which has no ->put_super(). bm_fill_super() installs s_ops only once simple_fill_super() returned success, and installing it earlier wouldn't help either because simple_fill_super() overwrites s_op. Either way vfs_get_super() calls deactivate_locked_super() and the reference is gone for good. binfmt_misc mounts are available in a user namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so an unprivileged caller under a tight memory cgroup can fail simple_fill_super() on demand and leak one user namespace per attempt. Drop the reference in ->kill_sb() instead, which runs unconditionally, the same way nfsd and rpc_pipefs release their keyed s_fs_info. That also stops ->put_super() from clearing s_fs_info while the superblock is still on @fs_supers. generic_shutdown_super() leaves it there on purpose so that sget_fc() keeps finding it until kill_sb() has run, but a NULL s_fs_info makes test_keyed_super() miss it, so a concurrent mount for the same user namespace skips the grab_super() wait and creates a second superblock for a namespace that is still being torn down. | ||||
| CVE-2026-72308 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | ||||
| CVE-2026-72260 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Check runtime resume during probe The MT8192 AFE probe enables runtime PM temporarily while reinitializing the regmap cache from hardware, but it uses pm_runtime_get_sync() without checking the return value. If runtime resume fails, probe keeps going without the device necessarily being accessible, and pm_runtime_get_sync() may leave the PM usage count incremented. The regmap_reinit_cache() failure path also returns before dropping the temporary PM reference and before clearing pm_runtime_bypass_reg_ctl. Use pm_runtime_resume_and_get() so resume failures do not leak a usage count, and clear the temporary bypass flag after dropping the probe PM reference on all regmap_reinit_cache() outcomes. | ||||
| CVE-2026-68371 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Do not put borrowed of_node in probe omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it. The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count. Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately. | ||||
| CVE-2026-74718 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: devlink: fix net namespace reference leak in reload devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net with a held reference. When the requested namespace differs from the current one and the reload action is not DRIVER_REINIT, the function returns -EOPNOTSUPP without releasing the reference. Add the missing put_net() on this error path. | ||||
| CVE-2026-72412 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix handling of _PAGE_UNUSED pte bit The _PAGE_UNUSED softbit should not really be lying around. Its sole purpose is to signal to try_to_unmap_one() and try_to_migrate_one() that the page can be discarded instead of being moved / swapped. KVM has no way to know why a page is being unmapped, so it sets the bit on userspace ptes corresponding to unused guest pages every time they get unmapped. KVM has no reasonable way to clear the bit once the page is in use again. While set_ptes() checks and clears the bit, other paths that set new ptes did not. This led to used pages being thrown out as if they were unused, causing guest corruption. Fix the issue by clearing the _PAGE_UNUSED bit for present ptes in set_pte(), i.e. whenever a present pte is getting set. The check in set_ptes() is then redundant and can be removed. Also fix gmap_helper_try_set_pte_unused() to only set the bit if the pte is present; the _PAGE_UNUSED bit is only defined for present ptes and thus should not be set for non-present ptes. | ||||
| CVE-2026-72456 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: release exe file resources on path failure get_current_exe_path() takes both an exe_file reference and a path reference before resolving the path name. If aa_path_name() failed, it returned immediately and leaked both references. Route the failure through the common cleanup path so fput() and path_put() always run after the references are acquired. | ||||
| CVE-2026-72461 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix refcount leak when updating the sk_ctx Currently update_sk_ctx() transfers the plabel reference, unfortunately it is also unconditionally put in the caller. Ideally we would make the caller conditionally put the reference based on whether it was transferred but for now just fix the bug by getting a reference. | ||||
| CVE-2026-72482 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpib: fix double decrement of descriptor_busy in command_ioctl() commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers") introduced a descriptor_busy reference counter to pin struct gpib_descriptor across IO ioctl operations. In command_ioctl(), the error path inside the loop decrements descriptor_busy and breaks, but execution then falls through to the unconditional decrement after the loop, underflowing the counter to -1. This re-enables the use-after-free that the original fix was meant to prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on an actively-used descriptor and frees it. Remove the early decrement from the error path. The post-loop decrement already handles all exit paths, matching the correct pattern used in read_ioctl() and write_ioctl(). | ||||
| CVE-2026-74381 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Allow entries in BO caches to be freed When a buffer object is pinned via host1x_bo_pin() with a cache, the resulting mapping is kept in the cache so it can be reused on subsequent pins. Each mapping held a reference to the underlying host1x_bo (taken in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached, the bo itself could not be freed. However, the only way to remove the cached mapping was through the free path of the buffer object. This meant that if a bo got cached, it could never get freed again. Resolve the circularity by holding a weak reference to the bo from the cache side. This is done by having the .pin callbacks not bump the bo's refcount -- instead the common Host1x bo code does so, except for the cache reference. Also move the remove-cache-mapping-on-free code into a common function inside Host1x code. This is only called from the TegraDRM GEM buffers since those are the only ones that can be cached at the moment. | ||||
| CVE-2026-74372 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: raid1: fix nr_pending leak in REQ_ATOMIC bad-block error path In raid1_write_request(), each per-mirror loop iteration begins by incrementing rdev->nr_pending. If a REQ_ATOMIC write encounters a badblock within the requested range, the code jumps to err_handle without dropping the reference taken for the current mirror. err_handle's cleanup loop will only decrements for k < i and r1_bio->bios[k] is non-NULL. The current slot is therefore skipped, leaving its nr_pending reference leaked permanently. The reference prevents the rdev from ever being removed, since raid1_remove_conf() refuses to remove an rdev with nr_pending > 0. Fix this by calling rdev_dec_pending() before jumping to err_handle. | ||||
| CVE-2026-74369 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish() In luo_file_unpreserve_files() and luo_file_finish(), reorder module_put() and xa_erase() to ensure the file handler module remains pinned while its operations are being accessed. Specifically, luo_get_id() dereferences fh->ops->get_id, so the module reference must be held until after xa_erase() (which calls luo_get_id) completes. For luo_file_finish(), this requires moving the module_put() call out of the luo_file_finish_one() helper and into the main loop of luo_file_finish() itself. | ||||
| CVE-2026-74432 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of released call in recvmsg(MSG_PEEK) Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released call if MSG_PEEK is in force (the function holds a ref on the call irrespective of whether MSG_PEEK is specified or not). | ||||