| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insyde IHISI function 0x49 can restore factory defaults for certain UEFI variables without further authentication by default, which could lead to a possible roll-back attack in certain platforms. This is fixed in: kernel 5.2, version 05.29.19; kernel 5.3, version 05.38.19; kernel 5.4, version 05.46.19; kernel 5.5, version 05.54.19; kernel 5.6, version 05.61.19. |
| Missing Authentication for Critical Function vulnerability in icegram Icegram allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Icegram: from n/a through 3.1.24. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| On the exos 9300 server, a SOAP API is reachable on port 8002. This API does not require any authentication prior to sending requests. Therefore, network access to the exos server allows e.g. the creation of arbitrary access log events as well as querying the 2FA PINs associated with the enrolled chip cards. |
| A client-side remote code execution vulnerability exists in Hanwha Techwin Smart Security Manager (SSM) versions 1.32 and 1.4, due to improper restrictions on the PUT method exposed by the bundled Apache ActiveMQ instance (running on port 8161). An attacker can exploit this flaw through a Cross-Origin Resource Sharing (CORS) bypass combined with JavaScript-triggered file uploads to the web server, ultimately resulting in arbitrary code execution with SYSTEM privileges.
This vulnerability bypasses the server-side mitigations introduced in ZDI-15-156 and ZDI-16-481 by shifting the exploitation to the client-side.
This product is now referred to as Hanwha Wisenet SSM and it is unknown if current versions are affected. |
| A local privilege escalation vulnerability exists in lastore-daemon, the system package manager daemon used in Deepin Linux (developed by Wuhan Deepin Technology Co., Ltd.). In versions 0.9.53-1 (Deepin 15.5) and 0.9.66-1 (Deepin 15.7), the D-Bus configuration permits any user in the sudo group to invoke the InstallPackage method without password authentication. By default, the first user created on Deepin is in the sudo group. An attacker with shell access can craft a .deb package containing a malicious post-install script and use dbus-send to install it via lastore-daemon, resulting in arbitrary code execution as root. |
| Chisel is a fast TCP/UDP tunnel, transported over HTTP, secured via SSH. The Chisel server doesn't ever read the documented `AUTH` environment variable used to set credentials, which allows any unauthenticated user to connect, even if credentials were set. Anyone running the Chisel server that is using the `AUTH` environment variable to specify credentials to authenticate against is affected by this vulnerability. Chisel is often used to provide an entrypoint to a private network, which means services that are gated by Chisel may be affected. Additionally, Chisel is often used for exposing services to the internet. An attacker could MITM requests by connecting to a Chisel server and requesting to forward traffic from a remote port. This issue has been addressed in release version 1.10.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper access restrictions in HCL BigFix Remote Control Server WebUI (versions 10.1.0.0248 and lower) allow non-admin users to view unauthorized information on certain web pages. |
| General Industrial Controls Lynx+ Gateway is missing critical authentication in the embedded web server which
could allow an attacker to send GET requests to obtain sensitive device
information. |
| A unauthorized access vulnerability exists in the Xiaomi phone framework. The vulnerability is caused by improper validation and can be exploited by attackers to Access sensitive methods. |
| A unauthorized access vulnerability exists in the Xiaomi phone framework. The vulnerability is caused by improper validation and can be exploited by attackers to Access sensitive methods. |
| Entrust Instant Financial Issuance (IFI) On Premise software (formerly referred to as CardWizard) versions 5.x, prior to 6.10.5, and prior to 6.11.1 contain an insecure .NET Remoting exposure in the Legacy Remoting Service that is enabled by default. The service registers a TCP remoting channel with SOAP and binary formatters configured at TypeFilterLevel=Full and exposes default ObjectURI endpoints such as logfile.rem, photo.rem, cwPhoto.rem, and reports.rem on a network-reachable remoting port. A remote, unauthenticated attacker who can reach the remoting port can invoke exposed remoting objects to read arbitrary files from the server and coerce outbound authentication, and may achieve arbitrary file write and remote code execution via known .NET Remoting exploitation techniques. This can lead to disclosure of sensitive installation and service-account data and compromise of the affected host. |
| A vulnerability was found in Excitel Broadband Private my Excitel App 3.13.0 on Android. It has been classified as problematic. Affected is an unknown function of the component One-Time Password Handler. The manipulation leads to improper restriction of excessive authentication attempts. The vendor was contacted early about this disclosure but did not respond in any way. |
| An authentication bypass vulnerability exists in the User profile management functionality of Socomec Easy Config System 2.6.1.0. A specially crafted database record can lead to unauthorized access. An attacker can modify a local database to trigger this vulnerability. |
| Lack of Rate Limiting in Sign-up workflow in Perforce Gliffy prior to version 4.14.0-7 on Gliffy online allows attacker to enumerate valid user emails and potentially DOS the server |
| Nautobot Single Source of Truth (SSoT) is an app for Nautobot. Prior to version 3.10.0, an unauthenticated attacker could access this page to view the Service Now public instance name e.g. companyname.service-now.com. This is considered low-value information. This does not expose the Secret, the Secret Name, or the Secret Value for the Username/Password for Service-Now.com. An unauthenticated member would not be able to change the instance name, nor set a Secret. There is not a way to gain access to other pages Nautobot through the unauthenticated Configuration page. This issue has been patched in version 3.10.0. |
| An issue was discovered in TitanHQ SpamTitan Email Security Gateway 8.00.x before 8.00.101 and 8.01.x before 8.01.14. The file quarantine.php within the SpamTitan interface allows unauthenticated users to trigger account-level actions using a crafted GET request. Notably, when a non-existent email address is provided as part of the email parameter, SpamTitan will automatically create a user record and associate quarantine settings with it - all without requiring authentication. |
| The vulnerability allows unauthenticated users to download a file containing session ID data by directly accessing the "/cgi-bin/CliniNET.prd/utils/userlogxls.pl" endpoint. |
| The paths "/cgi-bin/CliniNET.prd/utils/userlogstat.pl", "/cgi-bin/CliniNET.prd/utils/usrlogstat.pl", and "/cgi-bin/CliniNET.prd/utils/dblogstat.pl" expose data containing session IDs. |
| The "serverConfig" endpoint, which returns the module configuration including credentials, is accessible without authentication. |
