| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink
xfrmi_changelink() operates on at most two netns, dev_net(dev) and the
interface link netns xi->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in xi->net can rewrite an interface that
lives in xi->net.
Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the `-o/--output` argument in `trestle author jinja` allows writing files outside the intended workspace. The application does not properly validate, `../`, `..\`, or absolute paths. This allows arbitrary file write to attacker-controlled locations. Versions 3.12.3 and 4.0.3 patch the issue. |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. |
| Incorrect permission assignment for critical resource in Azure SQL Database allows an authorized attacker to elevate privileges locally. |
| Glances is an open-source system cross-platform monitoring tool. From 4.5.2 until 4.5.6, _sanitize_mustache_dict() in glances/actions.py skips nested list and dictionary strings such as process cmdline values, allowing pipe characters to survive chevron.render() and be executed by secure_popen() through administrator-configured action templates. This issue is fixed in 4.5.6. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| Apache Airflow's Task SDK rebuilt a `Callback` object from serialized data by re-running its constructor, which imports the module named by the stored callback path. Because `SyncCallback` is itself an Airflow class it passes the default `allowed_deserialization_classes` allow-list, so tightening that setting does not help. A Dag author — who controls a task instance's `next_kwargs` through the task execution API — can therefore cause an arbitrary module to be imported inside the scheduler process, when the scheduler's `awaiting_input` timeout sweep deserializes that value. No non-default configuration is required; the sweep runs unconditionally. Versions before 3.3.0 are not affected: the class existed, but the scheduler sweep that reaches it did not. This is a separate code path from CVE-2026-58076 and CVE-2026-67260, which cover different gadgets reaching deserialization — applying either of those fixes does not address this one. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
| Apache Airflow 3.3.0 moved human-in-the-loop tasks from the triggerer to a new `awaiting_input` task state swept by the scheduler. That sweep deserializes the task instance's `next_kwargs` without an allow-list, so a Dag author — who controls that value through the task execution API — can cause an arbitrary module import and object instantiation inside the scheduler process, or terminate the scheduler job. No non-default configuration is required: the sweep runs unconditionally every 15 seconds, and the default `allowed_deserialization_classes` setting does not cover this code path. Versions before 3.3.0 are not affected, because human-in-the-loop tasks deferred onto the triggerer instead. This is a different code path from CVE-2026-58076, which covers the same unguarded exception-node deserialization reached elsewhere — deployments that applied that fix must upgrade for this issue as well. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
| Use after free in Windows DNS allows an unauthorized attacker to execute code over a network. |
| UnixAuth lacks brute-force protection in Apache Ranger versions <= 2.8.0.
Note: UnixAuth is NOT a recommended option for production deployments.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable
mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG
or when no device is marked as master. Result bad memory access and kernel
crash[1].
Hence, skip the peer when lookup fails.
Note: In case there are peer flows, they are cleaned before LAG cleared
the master mark.
[1]
RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core]
Call Trace:
<TASK>
mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core]
mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core]
mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core]
mlx5_devcom_send_event+0x7a/0x140 [mlx5_core]
mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core]
mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core]
mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core]
mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core]
mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core]
mlx5e_detach_netdev+0x96/0xf0 [mlx5_core]
mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core]
__esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core]
mlx5e_rep_remove+0x22/0x30 [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xe8/0x1b0
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core]
mlx5_unregister_device+0x54/0x80 [mlx5_core]
mlx5_uninit_one+0x73/0x130 [mlx5_core]
remove_one+0x78/0xe0 [mlx5_core]
pci_device_remove+0x39/0xa0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer spill metadata during half-slot cleanup
__clean_func_state() cleans dead stack slots in 4-byte halves. When the
high half of a STACK_SPILL slot is dead and the low half remains live,
cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears
the saved spilled_ptr metadata.
That conversion is safe only for scalar spills. For a pointer spill, this
metadata clear lets a later 32-bit fill from the still-live half avoid the
normal non-scalar register-fill check and be treated as an ordinary scalar
stack read.
Leave non-scalar spill slots intact in this half-live shape. This is
conservative for pruning and preserves the existing
check_stack_read_fixed_off() rejection path for partial fills from pointer
spills. |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable directory. |
| Insertion of Sensitive Information into Log File (CWE-532) in some Command Centre Service installers could lead to Service Account credentials exposure.
Mitigating Factor: Only sites that install Command Centre Services with a custom Service Account (not the default Network Service account) are potentially impacted.
Mitigation: For sites concerned about exposure, the recommended action is to change the Service Account password. They can also delete any installer log files, usually found in %programdata%\Gallagher\Command Centre. |
