| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix driver deregistration order
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.
When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.
Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix ioctl hangup race
The tty ioctls can race with hangup and end up calling into a tty driver
for a device that is already gone or powered down.
Serialise the callbacks using the tty port mutex and add the missing
checks to make sure the port has not been hung up before accessing port
driver data or hardware.
This specifically avoids dereferencing a NULL-pointer if a device is
disconnected during lengthy break signalling.
Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or
hardware and are therefore not affected by the race. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix KASAN reported use-after-free when request is canceled
Alan reported that when doing stress testing sometimes KASAN notices
use-after-free during control channel operation (stripped down keeping
the relevant parts):
BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt]
Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760
<TASK>
tb_cfg_request_sync+0x240/0x250 [thunderbolt]
tb_cfg_read_raw+0x367/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 1760:
__kmalloc_cache_noprof+0x1ee/0x550
tb_cfg_read_raw+0x1d3/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
Freed by task 926:
kfree+0x18f/0x4a0
tb_cfg_request_put+0xb7/0xe0 [thunderbolt]
tb_cfg_request_work+0x82/0x120 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
Second to last potentially related work creation:
__queue_work+0x575/0xd00
queue_work_on+0x77/0x80
tb_cfg_request_cancel+0xc7/0x260 [thunderbolt]
tb_cfg_request_sync+0x1f6/0x250 [thunderbolt]
tb_cfg_read_raw+0x367/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
The last stack trace is helpful because it shows that we are cancelling
a request and looking at tb_cfg_request_cancel() what might happen is
that tb_cfg_request_work() completes right before tb_cfg_request_cancel()
starts and because of this it will call schedule_work() queueing the
same work to run again. However, it is already removed from the
request_queue and reference count is dropped so when
tb_cfg_request_work() triggers again it will access memory that is
already released.
Fix this so that we first make sure a cancelled request is not handed
away from tb_cfg_request_find() or scheduled to run. Then instead of
relying on the worker to clean up the request we will do it in
tb_cfg_request_cancel() after the work is canceled from running. Make
tb_cfg_request_dequeue() release the request only if it was actually
removed from the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject oversized XDomain properties responses
tb_xdp_properties_request() allocates room for 45 data dwords in its
252-byte response buffer. The XDomain length field is six bits wide,
however, and a malicious peer can set it to 63. After the fixed response
fields are subtracted, the driver treats this as 48 data dwords.
Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to
allocation size") only bounds the copy against data_len. If data_len is
at least 48, memcpy() reads 192 bytes from the 180-byte res->data array,
causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478
("thunderbolt: Limit XDomain response copy to actual frame size") limits
the earlier copy but does not constrain this header-derived length.
Reject response data lengths that exceed the allocated source buffer
before copying them into the assembled property block. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via zero range
smb3_zero_range() removed the pagecache only for the range being zeroed,
so when it extends the file the folio straddling the old EOF - which may
hold data dirtied past EOF through an mmap - was never dropped and became
visible as file content once the file was extended.
Lower the discard boundary to the smaller of the zero-range offset and the
old EOF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxcjk-1013: reject duplicate event disable
The IIO core does not filter duplicate writes to the event enable
attribute. kxcjk1013_write_event_config() already ignores repeated
enable requests, but a repeated disable request still calls
kxcjk1013_set_power_state(data, false), dropping a runtime PM reference
that was not acquired for this request. This can underflow the runtime
PM usage count and trigger a "Runtime PM usage count underflow" warning.
Return early when the requested state already matches ev_enable_state. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix use-after-free on unbind
ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: stm32-adc: fix possible division by zero in processed channel
In case the conversion has failed or returned zero, processing *val
can lead to a division by zero. Need to check for errors, or converted
value is zero, before processing the data. In case the converted value
is zero, e.g. the Vrefint channel, this should be considered as invalid
in all cases. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure
If devm_thermal_of_zone_register() fails, probe returns without
unregistering the IIO map array or disabling runtime PM.
Jump to err_map to release them. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering
matches iio_update_buffers(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Ensure bounce buffer used for unaligned case is zeroed.
iio_push_to_buffers_with_ts_unaligned() leaks uninitialized heap memory
to userspace if the data passed in is not a multiple of 8 bytes and the
timestamp is enabled. Specify __GFP_ZERO for the devm_krealloc()
to ensure any extra space is cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16136: fix unprotected debugfs reads
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: health: max30102: fix NULL dereference in interrupt handler
The interrupt is requested in max30102_probe() and stays enabled
for the lifetime of the device, but indio_dev->active_scan_mask is only
valid while a buffer is enabled. When an interrupt arrives while no
buffer is enabled, the handler dereferences the NULL active_scan_mask:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__bitmap_weight+0x64/0x98 (P)
max30102_interrupt_handler+0x48/0x160 [max30102]
Call max30102_fifo_count() at the top of the handler and return early
unless it reports a FIFO sample is ready. Because FIFO_RDY is the only
interrupt source enabled in max30102_chip_init(), an invocation of
max30102_interrupt_handler() without the FIFO_RDY interrupt status bit
set carries no data to read and can return before touching
active_scan_mask. A negative return from max30102_fifo_count()
indicates a failed interrupt status read and is treated the same way. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16400: fix unprotected debugfs reads
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be
converted without changing what the file returns. adis16475 and
adis16550 already use debugfs_create_file() for their open coded
files. Use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap020a00f: drain irq_work after free_irq
The threaded IRQ handler queues data->work through irq_work_queue() so
the trigger is polled from a per-CPU context. free_irq() does not flush
an irq_work the handler already queued, so after gp2ap020a00f_remove()
returns that work may still run and call iio_trigger_poll() on data->trig,
which the devm cleanup has already freed, causing a use-after-free.
Add irq_work_sync(&data->work) after free_irq() in remove() and in the
probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs:
fix use-after-free on remove").
Found by an in-house static analysis tool, confirmed by manual review. |
