| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: free skb when disconnected
When the simulated link is disconnected, virt_wifi_start_xmit() returns
NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this
return value as consumed, so every packet sent while disconnected leaks its
skb.
Free the skb before returning the drop status. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta->rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station_cleanup() and call it from both there and
ath11k_mac_peer_cleanup_all().
This should handle kmemleaks reports like:
unreferenced object 0xffffff801ae66400 (size 1024):
comm "hostapd", pid 1306, jiffies 4295011565
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc d61c08ec):
kmemleak_alloc+0x3c/0x50
__kmalloc_cache_noprof+0x2b0/0x3e0
ath11k_mac_op_sta_state+0x1dc/0xb10
drv_sta_state+0xac/0x6f8
sta_info_insert_rcu+0x314/0x5e0
sta_info_insert+0x14/0x38
ieee80211_add_station+0x10c/0x1a0
nl80211_new_station+0x3e8/0x680
genl_family_rcv_msg_doit+0xc0/0x120
genl_rcv_msg+0x1b4/0x258
netlink_rcv_skb+0x4c/0x108
genl_rcv+0x38/0x60
netlink_unicast+0x190/0x278
netlink_sendmsg+0x15c/0x370
____sys_sendmsg+0x120/0x290
___sys_sendmsg+0x70/0xa0
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix rmmio iounmap skipped on device removal
amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so
drm_dev_enter() is already false there and the iounmap() guarded by it
is skipped. This .remove path runs on both hot-unplug and plain rmmod,
so the register BAR ioremap mapping leaks one instance per unload.
Unmap rmmio unconditionally (guard only on non-NULL) and drop the now
unused idx.
(cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) |
| Missing release of memory after effective lifetime vulnerability in Apache Thrift c++ bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Multidict is an implementation of a multidict data structure. From 6.7.0 until 6.9.1, the C extension's items-view reflected union operation, operand | d.items(), in multidict_itemsview_or2_impl and subtraction operation, d.items() - operand, in multidict_itemsview_sub1_impl fail to release new key-identity and value references returned for each operand element. Applications that perform these operations over attacker-influenced sequences can leak two strong references per element, and garbage collection cannot reclaim them, so repeated operations can cause unbounded process memory growth and denial of service. Forward union, intersection, non-tuple operand elements, and pure-Python builds are not affected by this reference leak. This issue is fixed in version 6.9.1. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to 1.36.10, 1.37.6, 1.38.4, and 1.39.1, Envoy copies every decoded HTTP/2 Host header value before discarding it when :authority is already present. The discarded value bypasses saveHeader, so its bytes and count are not charged against request header limits. An unauthenticated client can use HPACK indexing to submit many references to a large Host value across a bounded number of streams, forcing extreme header-copy allocation and causing the proxy to be out-of-memory killed. The relevant scope boundary is that the demonstrated amplification uses HTTP/2 HPACK and the duplicate Host discard behavior. This issue is fixed in versions 1.36.10, 1.37.6, 1.38.4, and 1.39.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data->fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: delete timer and free skb queue when unloading
Fix possible crash and memory leak on driver unload by deleting
TX purge timer and freeing C2H queue in 'rtw_core_deinit()',
shrink critical section in the latter by freeing COEX queue
out of TX report lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: postpone mem_mgr IDR destruction to hpriv_release()
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources. |
